How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Can risers be installed on any tank?

Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.

Do risers help in cold climates?

Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.

Do I need a permit to add risers?

Usually not, but some areas have rules. Check with the Dale County health department or ask your septic company.

Septic Tank Risers for Level Plains Homes

If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.

Request a call and a company working in Level Plains will explain the options and install risers on your tank.

What risers do for a septic tank

Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

How riser installation works

The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.

Riser safety

Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.

Is a riser worth it

For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Level Plains and Daleville, Enterprise, New Brockton helps them match the right parts to your tank.

Choosing risers and lids for a Level Plains tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

After the risers go in

Make a note of where the lids are for future owners and service crews. Mowing around them is easy if they sit flush, and they make it simple to check the effluent filter or water level. Report any loose or damaged lid to your septic company.

Signs your tank needs risers

If lids are buried, if the crew has to probe the yard to find the tank, or if past visits left holes in the lawn, risers will help. They also make sense if your system has a filter that should be checked often.

Choosing riser lids for a Level Plains yard

Riser lids for Level Plains homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.

Risers and lids for Level Plains weather

Whatever the soil on your lot, easy access through a riser makes routine pumping and filter checks faster. With about 53 inches of precipitation a year, a well-sealed riser matters. Poorly sealed joints can let groundwater into the tank.

Local conditions in Level Plains that affect septic riser and lid installation

Among the mapped soils within about two miles of central Level Plains, the USDA soil survey rates 49% as very limited for septic absorption fields, 47% as somewhat limited and 4% as not limited. The most common drainage class is well drained. Conditions vary from lot to lot here, so a site evaluation is the only way to know how well a particular yard will handle a drain field.

Level Plains averages about 53 inches of precipitation a year, and December is usually the wettest month. January is the coldest month at about 47°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Level Plains means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Level Plains as 57% well drained, 17% somewhat excessively drained, 14% poorly drained, 10% moderately well drained, 2% somewhat poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Level Plains

These are the septic companies in our directory closest to Level Plains, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Parrish Enterprises Inc, Enterprise, AL, 5.4 mi
Dothan Vault-Septic Tank Co LC, Dothan, AL, 23.4 mi
R-R Backhoe Dozer Septic, Ashford, AL, 30.8 mi
Ashford Septic Tank Co, Ashford, AL, 31.3 mi
Jones Vault & Septic Tank Co, Abbeville, AL, 33.9 mi
Jimmie Mullen Septic Tank Service, Andalusia, AL, 44.7 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Level Plains:

Daleville, 3.5 mi
Enterprise, 4.6 mi
New Brockton, 10.1 mi
Newton, 10.9 mi
Ozark, 12.4 mi
Hartford, 14.7 mi

About Level Plains, AL

Level Plains is in Dale County, Alabama. About 1,831 people live there, across 3.1 square miles of land (about 597 per square mile).

Septic Riser and Lid Installation questions in Level Plains

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Can risers be installed on any tank?: Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
Do risers help in cold climates?: Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Do I need a permit to add risers?: Usually not, but some areas have rules. Check with the Dale County health department or ask your septic company.