How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Will risers make my yard look worse?

Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.

Can I mow over a septic riser?

Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.

Do I need a permit to add risers?

Usually not, but some areas have rules. Check with the Maricopa County health department or ask your septic company.

Septic Tank Risers for Chandler Homes

If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.

Request a call and a company working in Chandler will explain the options and install risers on your tank.

What a septic riser is

A riser is a short pipe or collar, usually plastic or concrete, that attaches to the tank opening and extends it to ground level. A lid on top, typically secured with screws or a lock, keeps it closed. Most tanks have at least two openings, and many benefit from a riser on each, plus one on the effluent filter.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

Installing risers on an existing tank

Nearly any concrete or plastic tank can accept risers. The installer matches the riser to the opening size and material, seals it to keep water out, and secures the lid. Lids should always be fastened so children and pets cannot open them.

Riser safety

Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.

What a riser job costs depends on

The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Chandler and Gilbert, Tempe, Guadalupe helps them match the right parts to your tank.

Choosing risers and lids for a Chandler tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

Living with risers

With risers in place, future pumping and inspections are faster and cleaner. Keep the lids visible, do not cover them with mulch or landscaping, and check every so often that the screws are tight and the lids are not cracked.

Signs a Chandler tank would benefit from risers

Risers are worth considering if every pumping visit in Chandler starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.

Why Chandler homeowners add risers

Risers bring the tank lids up to ground level on Chandler properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.

Risers and lids for Chandler weather

Where soils are rated very limited, as most mapped soils near Chandler are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Chandler gets about 10 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging.

Local conditions in Chandler that affect septic riser and lid installation

Among the mapped soils within about two miles of central Chandler, the USDA soil survey rates 71% as very limited for septic absorption fields, 19% as somewhat limited and 10% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Chandler averages about 10 inches of precipitation a year, and February is usually the wettest month. December is the coldest month at about 52°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Chandler means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Chandler as 100% well drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Chandler

These are the septic companies in our directory closest to Chandler, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Overley's Septic Service, Gilbert, AZ, 4.5 mi
Rooter Hero Plumbing & Air, Phoenix, AZ, 11.5 mi
A American Septic Service, Phoenix, AZ, 15.8 mi
Mesa Septic & Rooter Service, Mesa, AZ, 16.4 mi
Fred's Pumping Service, Phoenix, AZ, 16.5 mi
Basic Drilling Co, Apache Junction, AZ, 17.1 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Chandler:

Gilbert, 6.6 mi
Tempe, 8.6 mi
Guadalupe, 8.6 mi
Mesa, 11.3 mi
Queen Creek, 14.1 mi
Maricopa, 18.7 mi

About Chandler, AZ

Chandler is in Maricopa County, Arizona. About 280,167 people live there, across 65.6 square miles of land (about 4,268 per square mile).

Septic Riser and Lid Installation questions in Chandler

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Will risers make my yard look worse?: Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Can I mow over a septic riser?: Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
Do I need a permit to add risers?: Usually not, but some areas have rules. Check with the Maricopa County health department or ask your septic company.