Septic System Installation in Edgewater, CO
Whether you are building a new home in Edgewater or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.
Request a call and a local septic company that installs systems in Edgewater and Wheat Ridge, Lakewood, Arvada will explain the process from site evaluation to final inspection.
The installation process step by step
It starts with testing the soil to see how well it absorbs water. A designer or engineer then sizes the tank and dispersal area for the number of bedrooms. After the permit is approved, the crew excavates, sets the tank, installs the pipes and field, and schedules an inspection before backfilling.
Conventional and alternative systems
A conventional system is the simplest and usually the least expensive to maintain. Alternative systems add pumps, controls or treatment steps so they can work in difficult soil. Around Edgewater, the soil on your specific lot is what decides which category you fall into.
The permit process for a new system
Installing or replacing a septic system almost always needs approval from the Jefferson County health department or the state agency that oversees septic systems. The usual steps are a soil evaluation, a stamped design, plan review and one or more inspections during construction. Starting without a permit can mean digging it all up again.
Why installation prices vary
Installation price depends on the system type the soil allows, the size of the house, the distance from the house to the field, how easy the site is to reach with equipment, and design and permit fees. Engineered systems such as mounds and aerobic units cost more to build and maintain.
Protecting your investment
A new system can last decades with basic care. Know where every part is, avoid planting trees near the field, send roof water away from it, and keep grease, wipes and chemicals out of the drains. Schedule the first inspection and pumping so you have a baseline for later visits.
Choosing an installation company
Look for experience with the soils and systems common around Edgewater and Wheat Ridge, Lakewood, Arvada, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.
How long the whole project takes
The digging and installation often take days, but the full project in Edgewater can take several weeks once testing, design and permit review are included. Ask your installer for a realistic timeline for your county and what could change it, such as wet weather or a busy review office.
Common installation mistakes
The costliest mistakes are skipping the soil test, undersizing the system to save money, and building the field where water collects or where you later want a driveway or garage. Hiring an installer who does not handle permits can also delay the job or force rework after a failed inspection.
Before the digging starts in Edgewater
Installing a septic system in Edgewater touches the whole yard, so plan access for the excavator and the tank delivery. Mark wells, water lines and property corners first. Ask the installer how they will restore the lawn afterward. A clear plan now avoids moving a driveway, a shed or a fence later.
What Edgewater's soil means for a new system
The USDA soil survey rates most mapped soils near Edgewater as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Edgewater gets about 18 inches of precipitation a year, so water table limits are less common, though your soil test still decides the design. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.
Local conditions in Edgewater that affect septic installation
Among the mapped soils within about two miles of central Edgewater, the USDA soil survey rates 88% as very limited for septic absorption fields, 1% as somewhat limited and 10% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Edgewater averages about 18 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 30°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Edgewater means for septic installation
By drainage class, the USDA soil survey maps the land around Edgewater as 77% well drained, 12% somewhat poorly drained, 5% somewhat excessively drained, 5% moderately well drained. Most of the soil here drains reasonably well, so a conventional trench field is often possible where the lot allows, but the soil test still decides.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Edgewater
These are the septic companies in our directory closest to Edgewater, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Colorado Pumping, Golden, CO, 5.3 mi
- Plastics Inc, Commerce City, CO, 7.8 mi
- All Service Septic, Arvada, CO, 9.4 mi
- Douglas County Septic, Littleton, CO, 16.6 mi
- Evergreen Septic Pumping Co, Evergreen, CO, 17.4 mi
- Gapter Septic Systems & Excavating, Erie, CO, 17.8 mi
Septic Installation in nearby towns
We also cover septic installation in these towns near Edgewater:
About Edgewater, CO
Edgewater is in Jefferson County, Colorado. About 4,882 people live there, across 0.7 square miles of land (about 7,024 per square mile).
Septic Installation questions in Edgewater
- Can I install a septic system myself?
- Most areas require licensed designers or installers and inspections. Check with the Jefferson County health department before planning any work yourself.
- How big does my septic tank need to be?
- Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
- Can a replacement system go in the same place?
- Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
- Is SepticTank.com the installer?
- No. SepticTank.com connects you with an independent local septic company that serves Edgewater. That company designs, installs and prices the system.