How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Will risers make my yard look worse?

Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.

Do risers help in cold climates?

Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.

Do I need a permit to add risers?

Usually not, but some areas have rules. Check with the Arapahoe County health department or ask your septic company.

Septic Riser and Lid Installation in Englewood, CO

Easy access makes septic care simpler. Risers and lids let you and your septic company check the tank without digging up the yard, and they make it far easier to find the tank later.

Companies that work across Arapahoe County can add risers to most existing tanks.

What risers do for a septic tank

Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

How riser installation works

The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.

Keeping riser lids safe

An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.

What a riser job costs depends on

The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.

What to ask about riser installation

Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.

Choosing risers and lids for a Englewood tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

Living with risers

With risers in place, future pumping and inspections are faster and cleaner. Keep the lids visible, do not cover them with mulch or landscaping, and check every so often that the screws are tight and the lids are not cracked.

Signs a Englewood tank would benefit from risers

Risers are worth considering if every pumping visit in Englewood starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.

Why Englewood homeowners add risers

Risers bring the tank lids up to ground level on Englewood properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.

Risers and lids for Englewood weather

Where soils are rated very limited, as most mapped soils near Englewood are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Englewood gets about 17 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Englewood that affect septic riser and lid installation

Among the mapped soils within about two miles of central Englewood, the USDA soil survey rates 82% as very limited for septic absorption fields, 15% as somewhat limited and 3% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Englewood averages about 17 inches of precipitation a year, and July is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 28°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Englewood means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Englewood as 85% well drained, 7% poorly drained, 4% somewhat poorly drained, 3% excessively drained, 1% moderately well drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Englewood

These are the septic companies in our directory closest to Englewood, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Douglas County Septic, Littleton, CO, 10.3 mi
Plastics Inc, Commerce City, CO, 11.3 mi
Colorado Pumping, Golden, CO, 12.5 mi
All Service Septic, Arvada, CO, 17.2 mi
TBC Septic, Parker, CO, 19.5 mi
Evergreen Septic Pumping Co, Evergreen, CO, 21.4 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Englewood:

About Englewood, CO

Englewood is in Arapahoe County, Colorado. About 34,275 people live there, across 6.6 square miles of land (about 5,224 per square mile).

Septic Riser and Lid Installation questions in Englewood

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Will risers make my yard look worse?: Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Do risers help in cold climates?: Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Do I need a permit to add risers?: Usually not, but some areas have rules. Check with the Arapahoe County health department or ask your septic company.