How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Will risers make my yard look worse?

Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.

Do risers help in cold climates?

Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.

Is SepticTank.com the company that installs risers?

No. SepticTank.com connects you with an independent local septic company that serves Florence. That company does the work and sets its own prices.

Septic Riser and Lid Installation in Florence, CO

If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.

Request a call and a company working in Florence will explain the options and install risers on your tank.

What risers do for a septic tank

Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.

Benefits of adding risers

Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.

Installing risers step by step

The crew finds the tank and uncovers each opening, cleans the top of the tank, then attaches the riser with sealant or fasteners so groundwater cannot leak in. The riser is cut to the right height, a lid is screwed on and the soil is backfilled. It is often done during a pumping visit.

Keeping riser lids safe

An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.

What a riser job costs depends on

The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.

Questions to ask about risers

Ask how many openings your tank has, which should get risers, what material they use, and whether lids are secured with screws or locks. Ask if they can install during your next pumping.

Choosing risers and lids for a Florence tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

After risers are installed

Once risers are in, pumping and inspection visits in Florence are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.

Signs a Florence tank would benefit from risers

Risers are worth considering if every pumping visit in Florence starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.

Why Florence homeowners add risers

Risers bring the tank lids up to ground level on Florence properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.

Risers and lids for Florence weather

Where soils are rated very limited, as most mapped soils near Florence are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Florence gets about 15 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Florence that affect septic riser and lid installation

Among the mapped soils within about two miles of central Florence, the USDA soil survey rates 65% as very limited for septic absorption fields, 31% as somewhat limited and 4% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Florence averages about 15 inches of precipitation a year, and July is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 29°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Florence means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Florence as 72% well drained, 10% moderately well drained, 8% excessively drained, 4% poorly drained, 4% somewhat excessively drained, 3% somewhat poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Florence

These are the septic companies in our directory closest to Florence, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Kenagy Septic Service, Canon City, CO, 8.9 mi
Byrd's Sewer Rooter-Septic Tank, Canon City, CO, 9.7 mi
On The Move Septic LLC, Pueblo West, CO, 22.4 mi
Cut-Rate Sewer & Drain Service Inc, Pueblo, CO, 30.3 mi
Rye Septic Service, Rye, CO, 32.7 mi
American Septic & Sewer, Pueblo, CO, 35.4 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Florence:

Cañon City, 7.8 mi

About Florence, CO

Florence is in Fremont County, Colorado. About 3,862 people live there, across 4.5 square miles of land (about 859 per square mile).

Septic Riser and Lid Installation questions in Florence

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Will risers make my yard look worse?: Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Do risers help in cold climates?: Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Is SepticTank.com the company that installs risers?: No. SepticTank.com connects you with an independent local septic company that serves Florence. That company does the work and sets its own prices.