Septic Riser and Lid Installation in Severance, CO
Easy access makes septic care simpler. Risers and lids let you and your septic company check the tank without digging up the yard, and they make it far easier to find the tank later.
Companies that work across Weld County can add risers to most existing tanks.
What risers do for a septic tank
Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
Installing risers on an existing tank
Nearly any concrete or plastic tank can accept risers. The installer matches the riser to the opening size and material, seals it to keep water out, and secures the lid. Lids should always be fastened so children and pets cannot open them.
Keeping lids secure
A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.
What affects riser cost
Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.
Choosing a riser installer
Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Severance and Windsor, Timnath, Eaton helps them match the right parts to your tank.
Picking lids for Severance risers
Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.
After the risers go in
Make a note of where the lids are for future owners and service crews. Mowing around them is easy if they sit flush, and they make it simple to check the effluent filter or water level. Report any loose or damaged lid to your septic company.
Good times to add risers
The best time to add risers is during a scheduled pumping, when the lids are already dug up. They are also worth adding after buying a home if no one knows where the lids are, or if your service company charges extra to dig.
Choosing riser lids for a Severance yard
Riser lids for Severance homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.
Risers and lids for Severance weather
Whatever the soil on your lot, easy access through a riser makes routine pumping and filter checks faster. Severance gets about 18 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Severance that affect septic riser and lid installation
Among the mapped soils within about two miles of central Severance, the USDA soil survey rates 42% as very limited for septic absorption fields, 27% as somewhat limited and 31% as not limited. The most common drainage class is well drained. Conditions vary from lot to lot here, so a site evaluation is the only way to know how well a particular yard will handle a drain field.
Severance averages about 18 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 29°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Severance means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Severance as 93% well drained, 4% excessively drained, 4% poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Severance
These are the septic companies in our directory closest to Severance, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Urgent Services LLC, Greeley, CO, 6.7 mi
- Trans-Colorado Excavation LLC, Greeley, CO, 8.1 mi
- B & J Septic Service, Loveland, CO, 13.4 mi
- Sullivan Septic, Mead, CO, 20.2 mi
- Front Range Grease Removal Inc, Fort Lupton, CO, 30.0 mi
- A1 Septic Service, Brighton, CO, 33.2 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Severance:
About Severance, CO
Severance is in Weld County, Colorado. About 10,820 people live there, across 9.1 square miles of land (about 1,188 per square mile).
Septic Riser and Lid Installation questions in Severance
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Can risers be installed on any tank?
- Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
- Do risers help in cold climates?
- Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
- Do I need a permit to add risers?
- Usually not, but some areas have rules. Check with the Weld County health department or ask your septic company.