Septic Riser and Lid Installation in Silverthorne, CO
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Silverthorne will explain the options and install risers on your tank.
How risers and lids work
The riser bonds or bolts to the tank opening and is sealed to keep groundwater and soil out. It is cut to reach just at or above grade. The lid sits on top so the tank can be opened by hand without a shovel. Some lids are insulated for cold weather.
Why homeowners add risers
Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.
How riser installation works
The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.
Keeping lids secure
A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.
Is a riser worth it
For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.
Questions to ask about risers
Ask how many openings your tank has, which should get risers, what material they use, and whether lids are secured with screws or locks. Ask if they can install during your next pumping.
Choosing risers and lids for a Silverthorne tank
Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.
Getting the most from your risers
Risers make it easy to check the effluent filter between pumpings. Ask your septic company to show you how to open the lid safely and what to look for. Many Silverthorne homeowners also find it easier to keep a regular pumping schedule once access is simple.
Good times to add risers
The best time to add risers is during a scheduled pumping, when the lids are already dug up. They are also worth adding after buying a home if no one knows where the lids are, or if your service company charges extra to dig.
Risers and routine service in Silverthorne
Once risers are in, a Silverthorne septic company can open the tank in minutes. That makes it easier to keep a regular pumping schedule and to check the baffles and filter each time. Some homeowners add a riser over the outlet filter too, so it can be cleaned between pumpings.
Risers and lids for Silverthorne weather
Where soils are rated very limited, as most mapped soils near Silverthorne are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Silverthorne averages about 23 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 6 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Silverthorne that affect septic riser and lid installation
Among the mapped soils within about two miles of central Silverthorne, the USDA soil survey rates 90% as very limited for septic absorption fields, 10% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Silverthorne averages about 23 inches of precipitation a year, and April is usually the wettest month. Average temperatures stay below freezing for about 6 months a year, with January averaging 10°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Silverthorne means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Silverthorne as 76% well drained, 13% somewhat excessively drained, 5% very poorly drained, 5% poorly drained, 1% excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Silverthorne
These are the septic companies in our directory closest to Silverthorne, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Clearwater Cleanup Co, Breckenridge, CO, 10.2 mi
- Sani King Inc, Granby, CO, 30.8 mi
- Evergreen Septic Pumping Co, Evergreen, CO, 37.5 mi
- Acme Septic Inc, Boulder, CO, 41.7 mi
- Boulder Septic LLC, Boulder, CO, 49.4 mi
- All Service Septic, Arvada, CO, 49.9 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Silverthorne:
- Dillon, 3.4 mi
- Frisco, 5.6 mi
- Breckenridge, 11.4 mi
- Vail, 14.6 mi
About Silverthorne, CO
Silverthorne is in Summit County, Colorado. About 4,940 people live there, across 4.1 square miles of land (about 1,216 per square mile).
Septic Riser and Lid Installation questions in Silverthorne
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Will risers make my yard look worse?
- Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Do I need a permit to add risers?
- Usually not, but some areas have rules. Check with the Summit County health department or ask your septic company.