Skip to content

Septic System Installation in Aurora, IL

Replacing a failed system or installing one for a new build in Aurora involves more than digging a hole for a tank. Soil testing, system design, permits and inspections all shape the final result.

A local installer can tell you which system types are likely to work on your lot and what the process looks like.

The installation process step by step

It starts with testing the soil to see how well it absorbs water. A designer or engineer then sizes the tank and dispersal area for the number of bedrooms. After the permit is approved, the crew excavates, sets the tank, installs the pipes and field, and schedules an inspection before backfilling.

Types of septic systems

Conventional systems use a tank and a gravity drain field and suit lots with good soil. Where soil is poor, shallow or wet, options include pressure distribution, mound systems, chamber systems, sand filters and aerobic treatment units. Your soil test and local rules decide which types are allowed on your lot.

The permit process for a new system

Installing or replacing a septic system almost always needs approval from the Kane County health department or the state agency that oversees septic systems. The usual steps are a soil evaluation, a stamped design, plan review and one or more inspections during construction. Starting without a permit can mean digging it all up again.

Why installation prices vary

Installation price depends on the system type the soil allows, the size of the house, the distance from the house to the field, how easy the site is to reach with equipment, and design and permit fees. Engineered systems such as mounds and aerobic units cost more to build and maintain.

Caring for a new septic system

Keep a copy of the design and as-built drawing, schedule your first pumping as recommended, and keep vehicles and structures off the tank and field. Plant only grass over the dispersal area and direct roof and yard runoff away from it. Systems with pumps or treatment units need regular service to stay under warranty.

Choosing an installation company

Look for experience with the soils and systems common around Aurora and North Aurora, Montgomery, Batavia, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.

How long the whole project takes

The digging and installation often take days, but the full project in Aurora can take several weeks once testing, design and permit review are included. Ask your installer for a realistic timeline for your county and what could change it, such as wet weather or a busy review office.

Mistakes to avoid on a Aurora installation

The most expensive mistakes happen before the digging starts. Skipping the soil evaluation, choosing a system on price alone, or placing the drain field where future driveways, pools or additions will go all lead to trouble later. Undersizing the tank for the number of bedrooms is another common one. Ask your Aurora installer to walk you through the site plan and explain why each part sits where it does.

Building a system near Aurora

Homes around Aurora that are not on public sewer need a septic system sized to the house and the soil. The site evaluation shapes everything that follows, from the tank size to where the field goes. Plan the layout before other outdoor projects so nothing ends up on top of the field.

What Aurora's soil means for a new system

The USDA soil survey rates most mapped soils near Aurora as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Aurora averages about 39 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.

Local conditions in Aurora that affect septic installation

Among the mapped soils within about two miles of central Aurora, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is moderately well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Aurora averages about 39 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 22°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Aurora means for septic installation

By drainage class, the USDA soil survey maps the land around Aurora as 34% moderately well drained, 26% somewhat poorly drained, 15% well drained, 14% poorly drained, 10% very poorly drained, 2% somewhat excessively drained. With 50% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Aurora

These are the septic companies in our directory closest to Aurora, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Septic Installation in nearby towns

We also cover septic installation in these towns near Aurora:

About Aurora, IL

Aurora is in Kane County, Illinois. About 177,563 people live there, across 45.1 square miles of land (about 3,941 per square mile).

Septic Installation questions in Aurora

Can I install a septic system myself?
Most areas require licensed designers or installers and inspections. Check with the Kane County health department before planning any work yourself.
How big does my septic tank need to be?
Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
Can a replacement system go in the same place?
Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
Who approves septic installations in Aurora?
Septic permits are usually handled at the county or state level. Contact the Kane County health department to confirm the requirements for your property.

Get septic help in Aurora, IL

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.