Skip to content

Septic Tank Risers for Bement Homes

Many septic tanks in Bement sit a foot or more underground, which means digging every time the tank needs pumping or inspection. A riser brings the access opening up to ground level so the tank can be reached in minutes.

A local septic company that serves Bement and Monticello, Cerro Gordo, Atwood can install risers and secure lids, often during a regular pumping visit.

Why tanks are buried so deep

Older installations often placed lids well below the surface, sometimes to protect them from freezing or damage. That made sense at the time, but it means every pump-out starts with digging. Risers solve that without moving the tank.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

How riser installation works

The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.

Keeping riser lids safe

An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.

What a riser job costs depends on

The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Bement and Monticello, Cerro Gordo, Atwood helps them match the right parts to your tank.

Picking lids for Bement risers

Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.

After the risers go in

Make a note of where the lids are for future owners and service crews. Mowing around them is easy if they sit flush, and they make it simple to check the effluent filter or water level. Report any loose or damaged lid to your septic company.

Signs your tank needs risers

If lids are buried, if the crew has to probe the yard to find the tank, or if past visits left holes in the lawn, risers will help. They also make sense if your system has a filter that should be checked often.

Risers and routine service in Bement

Once risers are in, a Bement septic company can open the tank in minutes. That makes it easier to keep a regular pumping schedule and to check the baffles and filter each time. Some homeowners add a riser over the outlet filter too, so it can be cleaned between pumpings.

Risers and lids for Bement weather

Where soils are rated very limited, as most mapped soils near Bement are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Bement averages about 40 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Bement that affect septic riser and lid installation

Among the mapped soils within about two miles of central Bement, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is poorly drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Bement averages about 40 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 26°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Bement means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Bement as 37% poorly drained, 32% moderately well drained, 12% somewhat poorly drained, 12% well drained, 6% very poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Bement

These are the septic companies in our directory closest to Bement, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Bement:

About Bement, IL

Bement is in Piatt County, Illinois. About 1,468 people live there, across 0.8 square miles of land (about 1,887 per square mile).

Septic Riser and Lid Installation questions in Bement

Do septic risers let water into the tank?
Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
Can risers be installed on any tank?
Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
Can I mow over a septic riser?
Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
Is SepticTank.com the company that installs risers?
No. SepticTank.com connects you with an independent local septic company that serves Bement. That company does the work and sets its own prices.

Get septic help in Bement, IL

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.

Septic Riser and Lid Installation near Bement

Septic Riser and Lid Installation in other Illinois cities

All Illinois cities