Septic Tank Risers for Westchester Homes
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Westchester will explain the options and install risers on your tank.
What a septic riser is
A riser is a short pipe or collar, usually plastic or concrete, that attaches to the tank opening and extends it to ground level. A lid on top, typically secured with screws or a lock, keeps it closed. Most tanks have at least two openings, and many benefit from a riser on each, plus one on the effluent filter.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
How riser installation works
The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.
Keeping lids secure
A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.
What a riser job costs depends on
The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.
What to ask about riser installation
Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.
Plastic or concrete risers
Plastic risers are lightweight, easy to trim to height and do not corrode, so they suit most existing tanks. Concrete risers are heavy and durable but harder to install and can let in water if joints are not sealed well. Your septic company can recommend the right option for your tank.
After risers are installed
Once risers are in, pumping and inspection visits in Westchester are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.
Signs your tank needs risers
If lids are buried, if the crew has to probe the yard to find the tank, or if past visits left holes in the lawn, risers will help. They also make sense if your system has a filter that should be checked often.
Choosing riser lids for a Westchester yard
Riser lids for Westchester homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.
Risers and lids for Westchester weather
Where soils are rated very limited, as most mapped soils near Westchester are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Westchester averages about 39 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Westchester that affect septic riser and lid installation
Among the mapped soils within about two miles of central Westchester, the USDA soil survey rates 98% as very limited for septic absorption fields, 0% as somewhat limited and 2% as not limited. The most common drainage class is moderately well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Westchester averages about 39 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 22°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Westchester means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Westchester as 43% moderately well drained, 23% somewhat poorly drained, 16% well drained, 12% poorly drained, 4% very poorly drained, 2% excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Westchester
These are the septic companies in our directory closest to Westchester, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Mayrose Sanitary Service, Melrose Park, IL, 3.7 mi
- Busse Green Technologies Inc, Oak Park, IL, 5.2 mi
- Tri-County Trenching & Septic, Bensenville, IL, 6.9 mi
- Gerardi Sewer & Water Co, Addison, IL, 8.5 mi
- G & C Septic & Sewer, Darien, IL, 9.1 mi
- North Shore Sewerage-Drainage Co, Chicago, IL, 11.3 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Westchester:
- Hillside, 1.4 mi
- La Grange Park, 1.6 mi
- Broadview, 1.9 mi
- Bellwood, 2.4 mi
- Brookfield, 2.8 mi
- Berkeley, 3 mi
About Westchester, IL
Westchester is in Cook County, Illinois. About 16,094 people live there, across 3.7 square miles of land (about 4,366 per square mile).
Septic Riser and Lid Installation questions in Westchester
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Can risers be installed on any tank?
- Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Westchester. That company does the work and sets its own prices.