Skip to content

New Septic Systems for McCordsville Properties

Whether you are building a new home in McCordsville or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.

Request a call and a local septic company that installs systems in McCordsville and Fortville, Lawrence, Fishers will explain the process from site evaluation to final inspection.

How septic installation works

Most projects follow the same steps. First comes a site evaluation and soil test, then a system design sized for the home and a permit application. After that the tank and drain field are installed, followed by a final inspection before the system is covered. Your installer coordinates much of this, but timelines depend on local review and weather.

Types of septic systems

Conventional systems use a tank and a gravity drain field and suit lots with good soil. Where soil is poor, shallow or wet, options include pressure distribution, mound systems, chamber systems, sand filters and aerobic treatment units. Your soil test and local rules decide which types are allowed on your lot.

Permits and approvals

New and replacement systems almost always need a permit. Expect a soil evaluation, a design that meets local code, plan review and at least one inspection during installation. the Hancock County health department or your state agency sets the requirements, and many installers handle the application for you.

Understanding installation quotes

A complete quote should cover design, permits, excavation, the tank, the dispersal system, inspections and site restoration. Ask what is excluded, such as tree removal, electrical work for pumps or driveway repair. Compare quotes for the same system type.

Caring for a new septic system

Keep a copy of the design and as-built drawing, schedule your first pumping as recommended, and keep vehicles and structures off the tank and field. Plant only grass over the dispersal area and direct roof and yard runoff away from it. Systems with pumps or treatment units need regular service to stay under warranty.

Choosing an installation company

Look for experience with the soils and systems common around McCordsville and Fortville, Lawrence, Fishers, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.

How long the whole project takes

The digging and installation often take days, but the full project in McCordsville can take several weeks once testing, design and permit review are included. Ask your installer for a realistic timeline for your county and what could change it, such as wet weather or a busy review office.

Mistakes to avoid on a McCordsville installation

The most expensive mistakes happen before the digging starts. Skipping the soil evaluation, choosing a system on price alone, or placing the drain field where future driveways, pools or additions will go all lead to trouble later. Undersizing the tank for the number of bedrooms is another common one. Ask your McCordsville installer to walk you through the site plan and explain why each part sits where it does.

Planning a new system near McCordsville

A new septic system near McCordsville starts with a site visit and a soil evaluation. Those results decide the system type, the tank size and where the drain field can go. Hancock County reviews the design before work begins and inspects it before it is covered. Planning early keeps the project from holding up a closing or a build.

What McCordsville's soil means for a new system

The USDA soil survey rates most mapped soils near McCordsville as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. McCordsville averages about 44 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.

Local conditions in McCordsville that affect septic installation

Among the mapped soils within about two miles of central McCordsville, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is moderately well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

McCordsville averages about 44 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 26°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around McCordsville means for septic installation

By drainage class, the USDA soil survey maps the land around McCordsville as 40% moderately well drained, 19% somewhat poorly drained, 16% very poorly drained, 13% poorly drained, 12% well drained. With 48% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near McCordsville

These are the septic companies in our directory closest to McCordsville, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Septic Installation in nearby towns

We also cover septic installation in these towns near McCordsville:

About McCordsville, IN

McCordsville is in Hancock County, Indiana. About 11,273 people live there, across 8.3 square miles of land (about 1,360 per square mile).

Septic Installation questions in McCordsville

How long does septic installation take?
Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
How big does my septic tank need to be?
Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
Do I need a soil test for a new septic system?
Yes, in nearly all cases. The soil evaluation decides what type of system and how large a field your lot can support.
Who approves septic installations in McCordsville?
Septic permits are usually handled at the county or state level. Contact the Hancock County health department to confirm the requirements for your property.

Get septic help in McCordsville, IN

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.