How long does a septic inspection take?

Most take one to three hours. Time depends on how easy the system is to find, whether the tank is pumped during the visit and how much testing is done on the drain field.

Is a home inspection enough for a septic system?

Usually not. General home inspectors often do only a quick look at the septic system. A septic company opens the tank and evaluates the drain field, which gives a much more complete picture.

Who pays for a septic inspection during a sale?

It depends on your contract and local practice. Buyers often pay for their own inspection, while some sellers order one before listing. Your real estate agent can tell you what is typical in Clive.

What happens if the inspection finds a problem?

You get a clearer picture of what needs fixing and how urgent it is. Small items like a broken baffle are usually simple. Bigger findings, like a failing drain field, may call for repair quotes before a sale moves forward.

Septic System Inspections for Clive Homes

Most septic problems are cheaper to fix when they are found early. A professional inspection in Clive checks how the system is built, how it is performing and whether anything is close to failing.

You might be under contract on a house or have owned your home for years. Either way, a local company that works across Polk County can give you a clear written picture of your system.

Inside a full septic inspection

A full inspection looks at the whole system, not just the tank. The inspector finds the tank and field, reviews any permits or past reports, opens the tank, and checks the liquid level, scum and sludge layers, baffles and filter. They then look at the distribution box, pumps and alarms if present, and the drain field area.

Choosing the right kind of inspection

A walk-through inspection is fine as a routine check on a system you know well. For a home sale, a refinance or a system you know nothing about, choose a full inspection that opens the tank and looks at the drain field. Some lenders and counties specify which type they will accept.

Inspections for buyers and sellers

Buyers use an inspection to learn what they are taking on. Sellers use one to fix problems before listing or to show buyers the system is sound. In either case, schedule early in the process so there is time to pump, make repairs or negotiate. Waiting until the last week before closing leaves little room if the inspector finds a problem.

Reading a septic inspection report

The report should say where each part of the system is, how big the tank is and what it is made of, how full it was, and the condition of baffles, filter, lids and any pumps. It should describe how the drain field looked and list recommended repairs, with photos where possible.

How to prepare for an inspection

Gather any septic permits, past pumping receipts and repair records. Mark the tank location if you know it and make sure the area is clear. If you are selling, avoid pumping right before the inspection unless the inspector asks for it, since a freshly pumped tank can hide how the system has been performing. Make sure water is on in the house so the inspector can run fixtures.

Choosing a septic inspector

Look for an inspector who explains the process clearly, provides a detailed written report and is not rushing to sell you repairs. It is reasonable to ask whether the same company performs repairs and how they handle that. Experience with the types of systems common around Clive and Urbandale, Windsor Heights, West Des Moines is a plus.

Inspections for buyers and sellers near Clive

Real estate deals in Clive and nearby towns such as Urbandale, Windsor Heights, West Des Moines often include a septic inspection as part of due diligence. Some lenders and counties have their own requirements, so check with your agent early. Scheduling the inspection soon after an offer is accepted leaves time to handle any repairs.

What inspectors look at closely around Clive

Because most mapped soils near Clive are rated very limited for septic absorption, inspectors pay special attention to how the drain field is handling water. Clive averages about 35 inches of precipitation a year. Mention recent heavy rain to your inspector, since it can change what the drain field shows. Frozen ground in the colder months can limit what an inspector can see, so plan inspections for a home sale early when you can.

Local conditions in Clive that affect septic inspection

Among the mapped soils within about two miles of central Clive, the USDA soil survey rates 69% as very limited for septic absorption fields, 31% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Clive averages about 35 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 22°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Clive means for septic inspection

By drainage class, the USDA soil survey maps the land around Clive as 62% well drained, 16% poorly drained, 12% somewhat poorly drained, 6% moderately well drained, 4% somewhat excessively drained. A good inspection here checks the drain field as well as the tank, since 28% of the soil drains poorly and that is where fields tend to show trouble first.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Clive

These are the septic companies in our directory closest to Clive, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Cook Plumbing Corp-West Des, West Des Moines, IA, 4.9 mi
Rogers Septic Maintenance & Repair, Des Moines, IA, 9.9 mi
Johnson Excavating, Ankeny, IA, 11.3 mi
Best Portable Toilets, Des Moines, IA, 11.4 mi
A J Plumbing, Des Moines, IA, 13.8 mi
A1 Complete Septic Tank Service, Pleasant Hill, IA, 15.8 mi

Septic Inspection in nearby towns

We also cover septic inspection in these towns near Clive:

Urbandale, 1.9 mi
Windsor Heights, 4.4 mi
West Des Moines, 4.5 mi
Grimes, 4.5 mi
Waukee, 4.7 mi
Johnston, 6.6 mi

About Clive, IA

Clive is in Polk County, Iowa. About 19,005 people live there, across 7.7 square miles of land (about 2,483 per square mile).

Septic Inspection questions in Clive

How long does a septic inspection take?: Most take one to three hours. Time depends on how easy the system is to find, whether the tank is pumped during the visit and how much testing is done on the drain field.
Is a home inspection enough for a septic system?: Usually not. General home inspectors often do only a quick look at the septic system. A septic company opens the tank and evaluates the drain field, which gives a much more complete picture.
Who pays for a septic inspection during a sale?: It depends on your contract and local practice. Buyers often pay for their own inspection, while some sellers order one before listing. Your real estate agent can tell you what is typical in Clive.
What happens if the inspection finds a problem?: You get a clearer picture of what needs fixing and how urgent it is. Small items like a broken baffle are usually simple. Bigger findings, like a failing drain field, may call for repair quotes before a sale moves forward.