Do septic risers let water into the tank?

Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.

Will risers make my yard look worse?

Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.

Do risers help in cold climates?

Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.

Do I need a permit to add risers?

Usually not, but some areas have rules. Check with the Oakland County health department or ask your septic company.

Septic Tank Risers for Franklin Homes

Many septic tanks in Franklin sit a foot or more underground, which means digging every time the tank needs pumping or inspection. A riser brings the access opening up to ground level so the tank can be reached in minutes.

A local septic company that serves Franklin and Bingham Farms, Beverly Hills, Southfield can install risers and secure lids, often during a regular pumping visit.

What a septic riser is

A riser is a short pipe or collar, usually plastic or concrete, that attaches to the tank opening and extends it to ground level. A lid on top, typically secured with screws or a lock, keeps it closed. Most tanks have at least two openings, and many benefit from a riser on each, plus one on the effluent filter.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

A typical riser installation

Most riser jobs take a few hours. The tank openings are dug out, the riser is sealed to the tank, trimmed to sit at or just above grade, and a locking lid is installed. Doing it the same day as a pumping saves a second dig.

Keeping lids secure

A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.

What affects riser cost

Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Franklin and Bingham Farms, Beverly Hills, Southfield helps them match the right parts to your tank.

Getting the right fit

Tank openings vary in size and shape, so your installer will measure before choosing parts. The riser must seal tightly to the tank so groundwater stays out, and the lid must lock so it cannot be opened by children or pets. Ask your Franklin septic company which options they recommend for your tank and why.

After risers are installed

Once risers are in, pumping and inspection visits in Franklin are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.

Signs your tank needs risers

If lids are buried, if the crew has to probe the yard to find the tank, or if past visits left holes in the lawn, risers will help. They also make sense if your system has a filter that should be checked often.

Choosing riser lids for a Franklin yard

Riser lids for Franklin homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.

Risers and lids for Franklin weather

Where soils are rated very limited, as most mapped soils near Franklin are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Franklin averages about 33 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Franklin that affect septic riser and lid installation

Among the mapped soils within about two miles of central Franklin, the USDA soil survey rates 93% as very limited for septic absorption fields, 6% as somewhat limited and 1% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Franklin averages about 33 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 23°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Franklin means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Franklin as 46% well drained, 22% somewhat poorly drained, 11% very poorly drained, 10% poorly drained, 7% excessively drained, 4% moderately well drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Franklin

These are the septic companies in our directory closest to Franklin, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Gordon Lang Septic Systems Inc, Southfield, MI, 5.3 mi
B & F Septic Inc, Livonia, MI, 5.7 mi
A A Sewer Plumbing & Septic, Rochester Hills, MI, 10.5 mi
Todoroff Brothers Septic Service, Waterford, MI, 11.1 mi
Watkins Septic Tank Service, White Lake, MI, 12.1 mi
R & R Ventures Inc, Wixom, MI, 13.0 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Franklin:

Bingham Farms, 1.3 mi
Beverly Hills, 3.2 mi
Southfield, 3.8 mi
Lathrup Village, 4.3 mi
Farmington Hills, 4.4 mi
Birmingham, 4.8 mi

About Franklin, MI

Franklin is in Oakland County, Michigan. About 3,121 people live there, across 2.7 square miles of land (about 1,172 per square mile).

Septic Riser and Lid Installation questions in Franklin

Do septic risers let water into the tank?: Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
Will risers make my yard look worse?: Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Do risers help in cold climates?: Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Do I need a permit to add risers?: Usually not, but some areas have rules. Check with the Oakland County health department or ask your septic company.