Septic Riser and Lid Installation in Burnsville, MN
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Burnsville will explain the options and install risers on your tank.
What risers do for a septic tank
Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.
Why homeowners add risers
Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.
How riser installation works
The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.
Keeping riser lids safe
An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.
What a riser job costs depends on
The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.
Questions to ask about risers
Ask how many openings your tank has, which should get risers, what material they use, and whether lids are secured with screws or locks. Ask if they can install during your next pumping.
Choosing risers and lids for a Burnsville tank
Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.
After risers are installed
Once risers are in, pumping and inspection visits in Burnsville are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.
Signs a Burnsville tank would benefit from risers
Risers are worth considering if every pumping visit in Burnsville starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.
Why Burnsville homeowners add risers
Risers bring the tank lids up to ground level on Burnsville properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.
Risers and lids for Burnsville weather
Where soils are rated very limited, as most mapped soils near Burnsville are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Burnsville averages about 33 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 4 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Burnsville that affect septic riser and lid installation
Among the mapped soils within about two miles of central Burnsville, the USDA soil survey rates 90% as very limited for septic absorption fields, 10% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Burnsville averages about 33 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 4 months a year, with January averaging 13°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Burnsville means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Burnsville as 46% well drained, 14% excessively drained, 14% moderately well drained, 13% very poorly drained, 6% somewhat excessively drained, 5% poorly drained, 2% somewhat poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Burnsville
These are the septic companies in our directory closest to Burnsville, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Bixby Septics, Prior Lake, MN, 6.9 mi
- Mckinley Sewer Service & Supply, Prior Lake, MN, 8.6 mi
- Town & Country Sewer Service, Webster, MN, 16.3 mi
- Esi Septic Service, Hampton, MN, 18.7 mi
- Schlomka Services Inc, Hastings, MN, 19.1 mi
- Advanced Septic Solutions Inc, Northfield, MN, 19.5 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Burnsville:
- Apple Valley, 4.1 mi
- Savage, 4.2 mi
- Bloomington, 4.8 mi
- Lakeville, 6.2 mi
- Eagan, 6.7 mi
- Richfield, 7.6 mi
About Burnsville, MN
Burnsville is in Dakota County, Minnesota. About 64,772 people live there, across 24.9 square miles of land (about 2,597 per square mile).
Septic Riser and Lid Installation questions in Burnsville
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Will risers make my yard look worse?
- Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Burnsville. That company does the work and sets its own prices.