Septic Riser and Lid Installation in Exeter, NH
Easy access makes septic care simpler. Risers and lids let you and your septic company check the tank without digging up the yard, and they make it far easier to find the tank later.
Companies that work across Rockingham County can add risers to most existing tanks.
How risers and lids work
The riser bonds or bolts to the tank opening and is sealed to keep groundwater and soil out. It is cut to reach just at or above grade. The lid sits on top so the tank can be opened by hand without a shovel. Some lids are insulated for cold weather.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
How riser installation works
The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.
Riser safety
Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.
Is a riser worth it
For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.
Questions to ask about risers
Ask how many openings your tank has, which should get risers, what material they use, and whether lids are secured with screws or locks. Ask if they can install during your next pumping.
Choosing risers and lids for a Exeter tank
Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.
Getting the most from your risers
Risers make it easy to check the effluent filter between pumpings. Ask your septic company to show you how to open the lid safely and what to look for. Many Exeter homeowners also find it easier to keep a regular pumping schedule once access is simple.
Signs a Exeter tank would benefit from risers
Risers are worth considering if every pumping visit in Exeter starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.
Choosing riser lids for a Exeter yard
Riser lids for Exeter homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.
Risers and lids for Exeter weather
Where soils are rated very limited, as most mapped soils near Exeter are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. With about 46 inches of precipitation a year, a well-sealed riser matters. Poorly sealed joints can let groundwater into the tank. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Exeter that affect septic riser and lid installation
Among the mapped soils within about two miles of central Exeter, the USDA soil survey rates 90% as very limited for septic absorption fields, 10% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Exeter averages about 46 inches of precipitation a year, and October is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 23°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Exeter means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Exeter as 34% well drained, 22% moderately well drained, 16% very poorly drained, 12% excessively drained, 11% poorly drained, 5% somewhat excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Exeter
These are the septic companies in our directory closest to Exeter, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Septic Designs Of NH LLC, Exeter, NH, 1.7 mi
- C-V S & S, Kensington, NH, 4.5 mi
- Greg's Septic Service, Stratham, NH, 4.8 mi
- Wind River Environmental, Hampton, NH, 5.5 mi
- Foley's Septic Design Corp, Epping, NH, 5.9 mi
- E & E Septic, Epping, NH, 6.3 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Exeter:
- Newfields, 3.5 mi
- Stratham, 3.5 mi
- Kensington, 3.8 mi
- Brentwood, 4.7 mi
- East Kingston, 4.8 mi
- Newmarket, 5.7 mi
About Exeter, NH
Exeter is in Rockingham County, New Hampshire. About 16,172 people live there, across 19.6 square miles of land (about 825 per square mile).
Septic Riser and Lid Installation questions in Exeter
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Will risers make my yard look worse?
- Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Do I need a permit to add risers?
- Usually not, but some areas have rules. Check with the Rockingham County health department or ask your septic company.