Do septic risers let water into the tank?

Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.

Can risers be installed on any tank?

Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.

Do risers help in cold climates?

Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.

Is SepticTank.com the company that installs risers?

No. SepticTank.com connects you with an independent local septic company that serves Selma. That company does the work and sets its own prices.

Septic Riser and Lid Installation in Selma, NC

If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.

Request a call and a company working in Selma will explain the options and install risers on your tank.

How risers and lids work

The riser bonds or bolts to the tank opening and is sealed to keep groundwater and soil out. It is cut to reach just at or above grade. The lid sits on top so the tank can be opened by hand without a shovel. Some lids are insulated for cold weather.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

Installing risers on an existing tank

Nearly any concrete or plastic tank can accept risers. The installer matches the riser to the opening size and material, seals it to keep water out, and secures the lid. Lids should always be fastened so children and pets cannot open them.

Riser safety

Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.

What affects riser cost

Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.

What to ask about riser installation

Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.

Choosing risers and lids for a Selma tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

Living with risers

With risers in place, future pumping and inspections are faster and cleaner. Keep the lids visible, do not cover them with mulch or landscaping, and check every so often that the screws are tight and the lids are not cracked.

Signs your tank needs risers

If lids are buried, if the crew has to probe the yard to find the tank, or if past visits left holes in the lawn, risers will help. They also make sense if your system has a filter that should be checked often.

Choosing riser lids for a Selma yard

Riser lids for Selma homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.

Risers and lids for Selma weather

Where soils are rated very limited, as most mapped soils near Selma are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. With about 49 inches of precipitation a year, a well-sealed riser matters. Poorly sealed joints can let groundwater into the tank.

Local conditions in Selma that affect septic riser and lid installation

Among the mapped soils within about two miles of central Selma, the USDA soil survey rates 64% as very limited for septic absorption fields, 36% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Selma averages about 49 inches of precipitation a year, and August is usually the wettest month. January is the coldest month at about 40°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Selma means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Selma as 51% well drained, 21% poorly drained, 15% moderately well drained, 12% somewhat poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Selma

These are the septic companies in our directory closest to Selma, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Phillips Backhoe Service, Clayton, NC, 7.1 mi
Neuse River Septic LLC, Clayton, NC, 10.0 mi
C's Septic Tank & Pumping LLC, Four Oaks, NC, 11.0 mi
Creech's Septic Tank-Grease, Kenly, NC, 12.5 mi
Johnsons Septic Service, Clayton, NC, 13.6 mi
B & R Septic LLC, Pikeville, NC, 14.7 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Selma:

Pine Level, 3.5 mi
Smithfield, 3.6 mi
Wilson's Mills, 5.1 mi
Princeton, 8.9 mi
Four Oaks, 9.6 mi
Kenly, 10.1 mi

About Selma, NC

Selma is in Johnston County, North Carolina. About 7,012 people live there, across 5.4 square miles of land (about 1,297 per square mile).

Septic Riser and Lid Installation questions in Selma

Do septic risers let water into the tank?: Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
Can risers be installed on any tank?: Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
Do risers help in cold climates?: Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Is SepticTank.com the company that installs risers?: No. SepticTank.com connects you with an independent local septic company that serves Selma. That company does the work and sets its own prices.