How long does septic installation take?

Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.

What is a mound system?

A mound system raises the drain field above the natural soil using sand and fill. It is used where the soil is too shallow, too wet or too slow draining for a conventional field.

Do I need a soil test for a new septic system?

Yes, in nearly all cases. The soil evaluation decides what type of system and how large a field your lot can support.

Is SepticTank.com the installer?

No. SepticTank.com connects you with an independent local septic company that serves Lincoln. That company designs, installs and prices the system.

New Septic Systems for Lincoln Properties

A new septic system is a long-term investment. Getting it right means a proper site evaluation, a design that fits your property and a permit approved before any digging starts.

Septic companies that work across Burleigh County can guide you through each step and handle much of the paperwork.

The steps of a new septic installation

Expect five stages: site and soil evaluation, system design, permit approval, construction, and inspection before the trenches are covered. Weather and permit review times affect the schedule more than the digging itself, which often takes only a few days once everything is approved.

Choosing a system for your lot

Your lot decides more than your budget does. Good, deep soil allows a conventional tank and field. Tight lots, high water tables and clay often call for an engineered option such as a mound, pressure dosed field or aerobic unit. A designer explains which systems are allowed on your property.

What the permit process involves

Most permit processes include a site and soil evaluation, a system design, plan approval and final inspection. Fees and timelines vary. Starting the process early, especially for new construction, keeps the project on schedule.

Why installation prices vary

Soil and site conditions drive most of the difference. A flat lot with deep, well-drained soil is simpler than a sloped lot with clay or high groundwater. Access for equipment and the distance from the house also matter.

After installation

Ask your installer for records, maintenance instructions and warranty details. Mark the tank and field location so they are not damaged by future projects. Some systems require a service contract, so confirm what applies to yours.

Choosing an installation company

Look for experience with the soils and systems common around Lincoln and Bismarck, Mandan, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.

Getting ready for installation day

Clear access for equipment, mark wells, underground utilities and sprinkler lines, and plan where soil and materials will be staged. Your Lincoln installer will call in utility locates before digging. Expect some disturbance to the yard, which is regraded and seeded or restored as part of the job.

What experienced installers watch for

Good installers in Lincoln pay attention to setbacks from wells and property lines, the slope of the lot, and where roof and yard water drains. They also plan how equipment will reach the site without compacting the future drain field. They also confirm the design matches the permit before the first shovel goes in. Small details at this stage decide whether the system lasts decades or needs early repair.

Building a system near Lincoln

Homes around Lincoln that are not on public sewer need a septic system sized to the house and the soil. The site evaluation shapes everything that follows, from the tank size to where the field goes. Plan the layout before other outdoor projects so nothing ends up on top of the field.

What Lincoln's soil means for a new system

Soils around Lincoln range from good to very limited, so the system type depends on the results of the soil test on your lot. Lincoln gets about 20 inches of precipitation a year, so water table limits are less common, though your soil test still decides the design. About 5 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.

Local conditions in Lincoln that affect septic installation

Among the mapped soils within about two miles of central Lincoln, the USDA soil survey rates 55% as very limited for septic absorption fields, 45% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Conditions vary from lot to lot here, so a site evaluation is the only way to know how well a particular yard will handle a drain field.

Lincoln averages about 20 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 5 months a year, with January averaging 14°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Lincoln means for septic installation

By drainage class, the USDA soil survey maps the land around Lincoln as 62% well drained, 14% poorly drained, 11% moderately well drained, 6% very poorly drained, 5% somewhat excessively drained, 2% excessively drained. With 20% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Lincoln

These are the septic companies in our directory closest to Lincoln, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Dueces Wild Septic Service, Bismarck, ND, 1.8 mi
Professional Pumping Service, Bismarck, ND, 3.3 mi
Turd Burglar, Bismarck, ND, 6.1 mi
A1 Septic Pumping Plus, Mandan, ND, 6.5 mi
James Vault & Precast Co, Bismarck, ND, 8.2 mi
Bismarck-Septic-Excavating, Bismarck, ND, 13.6 mi

Septic Installation in nearby towns

We also cover septic installation in these towns near Lincoln:

Bismarck, 4.7 mi
Mandan, 9.9 mi

About Lincoln, ND

Lincoln is in Burleigh County, North Dakota. About 4,426 people live there, across 1.6 square miles of land (about 2,854 per square mile).

Septic Installation questions in Lincoln

How long does septic installation take?: Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
What is a mound system?: A mound system raises the drain field above the natural soil using sand and fill. It is used where the soil is too shallow, too wet or too slow draining for a conventional field.
Do I need a soil test for a new septic system?: Yes, in nearly all cases. The soil evaluation decides what type of system and how large a field your lot can support.
Is SepticTank.com the installer?: No. SepticTank.com connects you with an independent local septic company that serves Lincoln. That company designs, installs and prices the system.