New Septic Systems for Akron Properties
Whether you are building a new home in Akron or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.
Request a call and a local septic company that installs systems in Akron and Tallmadge, Munroe Falls, Mogadore will explain the process from site evaluation to final inspection.
How septic installation works
Most projects follow the same steps. First comes a site evaluation and soil test, then a system design sized for the home and a permit application. After that the tank and drain field are installed, followed by a final inspection before the system is covered. Your installer coordinates much of this, but timelines depend on local review and weather.
Choosing the right system
The best system is the one your soil and lot can support. Good, deep soil often allows a conventional system. Clay, high groundwater or shallow bedrock may call for a mound, pressure distribution or an aerobic unit. Each has different costs and maintenance needs, so ask your installer to explain them.
The permit process for a new system
Installing or replacing a septic system almost always needs approval from the Summit County health department or the state agency that oversees septic systems. The usual steps are a soil evaluation, a stamped design, plan review and one or more inspections during construction. Starting without a permit can mean digging it all up again.
Why installation prices vary
Soil and site conditions drive most of the difference. A flat lot with deep, well-drained soil is simpler than a sloped lot with clay or high groundwater. Access for equipment and the distance from the house also matter.
The first years with a new system
Keep the design drawing and the final inspection report somewhere safe. Pump on the schedule your installer recommends, use water steadily rather than all at once, and keep vehicles and new structures off the tank and field. Let grass establish over the field before heavy use of the yard.
Before you sign
Make sure the contract lists the system type, the scope of work, permit responsibilities, the timeline, cleanup and warranty. Ask how weather or unexpected site conditions will be handled.
Scheduling a septic installation
Start early if you are building or replacing a failing system. Book the soil evaluation first, since everything else depends on it. Ask your installer how long permits are currently taking with the Summit County health department, and plan for weather, especially if the work falls in winter or a rainy season.
Mistakes to avoid on a Akron installation
The most expensive mistakes happen before the digging starts. Skipping the soil evaluation, choosing a system on price alone, or placing the drain field where future driveways, pools or additions will go all lead to trouble later. Undersizing the tank for the number of bedrooms is another common one. Ask your Akron installer to walk you through the site plan and explain why each part sits where it does.
Before the digging starts in Akron
Installing a septic system in Akron touches the whole yard, so plan access for the excavator and the tank delivery. Mark wells, water lines and property corners first. Ask the installer how they will restore the lawn afterward. A clear plan now avoids moving a driveway, a shed or a fence later.
What Akron's soil means for a new system
The USDA soil survey rates most mapped soils near Akron as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Akron averages about 39 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.
Local conditions in Akron that affect septic installation
Among the mapped soils within about two miles of central Akron, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Akron averages about 39 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Akron means for septic installation
By drainage class, the USDA soil survey maps the land around Akron as 73% well drained, 10% moderately well drained, 8% somewhat poorly drained, 4% poorly drained, 4% very poorly drained. Most of the soil here drains reasonably well, so a conventional trench field is often possible where the lot allows, but the soil test still decides.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Akron
These are the septic companies in our directory closest to Akron, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Caywood Septic & Drain Service, Akron, OH, 7.5 mi
- Bob Youngs Septic Cleaning, Akron, OH, 7.6 mi
- Beamer Septic Repair & Installation, Uniontown, OH, 9.4 mi
- Acme Septic Tank Cleaning, New Franklin, OH, 10.0 mi
- Soisson Excavating, Uniontown, OH, 10.7 mi
- Buckeye Plumbing, Hartville, OH, 11.7 mi
Septic Installation in nearby towns
We also cover septic installation in these towns near Akron:
- Tallmadge, 5.3 mi
- Munroe Falls, 6 mi
- Mogadore, 6.3 mi
- Silver Lake, 6.3 mi
- Fairlawn, 6.3 mi
- Lakemore, 6.5 mi
About Akron, OH
Akron is in Summit County, Ohio. About 188,701 people live there, across 61.9 square miles of land (about 3,047 per square mile).
Septic Installation questions in Akron
- How long does septic installation take?
- Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
- How big does my septic tank need to be?
- Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
- Can a replacement system go in the same place?
- Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
- Is SepticTank.com the installer?
- No. SepticTank.com connects you with an independent local septic company that serves Akron. That company designs, installs and prices the system.