Septic System Installation in Kent, OH
Whether you are building a new home in Kent or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.
Request a call and a local septic company that installs systems in Kent and Munroe Falls, Tallmadge, Stow will explain the process from site evaluation to final inspection.
The steps of a new septic installation
Expect five stages: site and soil evaluation, system design, permit approval, construction, and inspection before the trenches are covered. Weather and permit review times affect the schedule more than the digging itself, which often takes only a few days once everything is approved.
Conventional and alternative systems
A conventional system is the simplest and usually the least expensive to maintain. Alternative systems add pumps, controls or treatment steps so they can work in difficult soil. Around Kent, the soil on your specific lot is what decides which category you fall into.
Approvals you will need
Plan on a permit for any new or replacement system. Regulators typically want a site evaluation, a design that meets local code and an inspection before the system is covered. Your installer or designer often handles the paperwork, but the permit is tied to your property, so keep copies.
Why installation prices vary
Soil and site conditions drive most of the difference. A flat lot with deep, well-drained soil is simpler than a sloped lot with clay or high groundwater. Access for equipment and the distance from the house also matter.
Getting the most from your new system
Good habits protect your investment: spread out laundry, fix leaks promptly, avoid flushing wipes and grease, and pump on schedule. If your system has an alarm, learn what it means and who to call.
Before you sign
Make sure the contract lists the system type, the scope of work, permit responsibilities, the timeline, cleanup and warranty. Ask how weather or unexpected site conditions will be handled.
Getting ready for installation day
Clear access for equipment, mark wells, underground utilities and sprinkler lines, and plan where soil and materials will be staged. Your Kent installer will call in utility locates before digging. Expect some disturbance to the yard, which is regraded and seeded or restored as part of the job.
Mistakes to avoid on a Kent installation
The most expensive mistakes happen before the digging starts. Skipping the soil evaluation, choosing a system on price alone, or placing the drain field where future driveways, pools or additions will go all lead to trouble later. Undersizing the tank for the number of bedrooms is another common one. Ask your Kent installer to walk you through the site plan and explain why each part sits where it does.
Building a system near Kent
Homes around Kent that are not on public sewer need a septic system sized to the house and the soil. The site evaluation shapes everything that follows, from the tank size to where the field goes. Plan the layout before other outdoor projects so nothing ends up on top of the field.
What Kent's soil means for a new system
The USDA soil survey rates most mapped soils near Kent as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Kent averages about 39 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.
Local conditions in Kent that affect septic installation
Among the mapped soils within about two miles of central Kent, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Kent averages about 39 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Kent means for septic installation
By drainage class, the USDA soil survey maps the land around Kent as 33% well drained, 33% moderately well drained, 14% poorly drained, 13% somewhat poorly drained, 4% very poorly drained, 3% excessively drained. With 31% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Kent
These are the septic companies in our directory closest to Kent, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Aris Co LLC, Aurora, OH, 11.1 mi
- Soisson Excavating, Uniontown, OH, 12.3 mi
- Buckeye Plumbing, Hartville, OH, 12.5 mi
- Bob Youngs Septic Cleaning, Akron, OH, 12.7 mi
- Fred's Septic Service, Atwater, OH, 13.1 mi
- Caywood Septic & Drain Service, Akron, OH, 13.6 mi
Septic Installation in nearby towns
We also cover septic installation in these towns near Kent:
- Munroe Falls, 3.9 mi
- Tallmadge, 4.3 mi
- Stow, 4.4 mi
- Silver Lake, 4.9 mi
- Ravenna, 6.3 mi
- Streetsboro, 6.4 mi
About Kent, OH
Kent is in Portage County, Ohio. About 27,601 people live there, across 9.2 square miles of land (about 2,993 per square mile).
Septic Installation questions in Kent
- How long does septic installation take?
- Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
- How big does my septic tank need to be?
- Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
- Can a replacement system go in the same place?
- Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
- Is SepticTank.com the installer?
- No. SepticTank.com connects you with an independent local septic company that serves Kent. That company designs, installs and prices the system.