Septic Tank Risers for Kent Homes
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Kent will explain the options and install risers on your tank.
What risers do for a septic tank
Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.
Why homeowners add risers
Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.
Installing risers step by step
The crew finds the tank and uncovers each opening, cleans the top of the tank, then attaches the riser with sealant or fasteners so groundwater cannot leak in. The riser is cut to the right height, a lid is screwed on and the soil is backfilled. It is often done during a pumping visit.
Keeping lids secure
A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.
Is a riser worth it
For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.
What to ask about riser installation
Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.
Picking lids for Kent risers
Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.
Getting the most from your risers
Risers make it easy to check the effluent filter between pumpings. Ask your septic company to show you how to open the lid safely and what to look for. Many Kent homeowners also find it easier to keep a regular pumping schedule once access is simple.
Is your tank a good candidate
Most tanks can take risers, but the value depends on how deep the lids are and how often the tank is opened. Ask your Kent septic company how deep your lids sit, how much digging costs on each visit, and whether an effluent filter is installed. Those answers usually make the decision easy.
Why Kent homeowners add risers
Risers bring the tank lids up to ground level on Kent properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.
Risers and lids for Kent weather
Where soils are rated very limited, as most mapped soils near Kent are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Kent averages about 39 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Kent that affect septic riser and lid installation
Among the mapped soils within about two miles of central Kent, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Kent averages about 39 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Kent means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Kent as 33% well drained, 33% moderately well drained, 14% poorly drained, 13% somewhat poorly drained, 4% very poorly drained, 3% excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Kent
These are the septic companies in our directory closest to Kent, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Aris Co LLC, Aurora, OH, 11.1 mi
- Soisson Excavating, Uniontown, OH, 12.3 mi
- Buckeye Plumbing, Hartville, OH, 12.5 mi
- Bob Youngs Septic Cleaning, Akron, OH, 12.7 mi
- Fred's Septic Service, Atwater, OH, 13.1 mi
- Caywood Septic & Drain Service, Akron, OH, 13.6 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Kent:
- Munroe Falls, 3.9 mi
- Tallmadge, 4.3 mi
- Stow, 4.4 mi
- Silver Lake, 4.9 mi
- Ravenna, 6.3 mi
- Streetsboro, 6.4 mi
About Kent, OH
Kent is in Portage County, Ohio. About 27,601 people live there, across 9.2 square miles of land (about 2,993 per square mile).
Septic Riser and Lid Installation questions in Kent
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Can risers be installed on any tank?
- Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Kent. That company does the work and sets its own prices.