How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Will risers make my yard look worse?

Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.

Can I mow over a septic riser?

Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.

Is SepticTank.com the company that installs risers?

No. SepticTank.com connects you with an independent local septic company that serves Kenton. That company does the work and sets its own prices.

Septic Tank Risers for Kenton Homes

If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.

Request a call and a company working in Kenton will explain the options and install risers on your tank.

How risers and lids work

The riser bonds or bolts to the tank opening and is sealed to keep groundwater and soil out. It is cut to reach just at or above grade. The lid sits on top so the tank can be opened by hand without a shovel. Some lids are insulated for cold weather.

Benefits of adding risers

Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.

What to expect on installation day

Most riser installations take a few hours. The tank is often pumped at the same time so the crew can inspect it while the openings are exposed. Expect some digging around the lids, which is backfilled when the job is done.

Keeping lids secure

A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.

Is a riser worth it

For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Kenton and Forest, Ada, Arlington helps them match the right parts to your tank.

Picking lids for Kenton risers

Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.

After risers are installed

Once risers are in, pumping and inspection visits in Kenton are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.

Signs a Kenton tank would benefit from risers

Risers are worth considering if every pumping visit in Kenton starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.

Risers on Hardin County septic tanks

Many older tanks in Hardin County were buried deep with no easy access, so riser installation is a common job for companies serving Kenton and Forest, Ada, Arlington. Adding them during the next pumping visit avoids digging twice.

Risers and lids for Kenton weather

Where soils are rated very limited, as most mapped soils near Kenton are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Kenton averages about 38 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Kenton that affect septic riser and lid installation

Among the mapped soils within about two miles of central Kenton, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is somewhat poorly drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Kenton averages about 38 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 26°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Kenton means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Kenton as 36% somewhat poorly drained, 26% moderately well drained, 20% well drained, 16% very poorly drained, 3% poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Kenton

These are the septic companies in our directory closest to Kenton, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Manns Septic & Drain Cleaning, Kenton, OH, 2.0 mi
F & L Septic Cleaning, Kenton, OH, 5.0 mi
J B Walter Construction, Mt Blanchard, OH, 15.4 mi
Allen Hughes Septic Service, Harrod, OH, 16.2 mi
Kidd's Septic Service Inc, Findlay, OH, 20.1 mi
Kelly's Septic Service, Bellefontaine, OH, 20.4 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Kenton:

Forest, 12.1 mi
Ada, 14.1 mi
Arlington, 17.4 mi
Russells Point, 19.3 mi

About Kenton, OH

Kenton is in Hardin County, Ohio. About 7,840 people live there, across 5.0 square miles of land (about 1,568 per square mile).

Septic Riser and Lid Installation questions in Kenton

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Will risers make my yard look worse?: Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Can I mow over a septic riser?: Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
Is SepticTank.com the company that installs risers?: No. SepticTank.com connects you with an independent local septic company that serves Kenton. That company does the work and sets its own prices.