New Septic Systems for Edmond Properties
Whether you are building a new home in Edmond or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.
Request a call and a local septic company that installs systems in Edmond and Jones, The Village, Nichols Hills will explain the process from site evaluation to final inspection.
The installation process step by step
It starts with testing the soil to see how well it absorbs water. A designer or engineer then sizes the tank and dispersal area for the number of bedrooms. After the permit is approved, the crew excavates, sets the tank, installs the pipes and field, and schedules an inspection before backfilling.
Choosing a system for your lot
Your lot decides more than your budget does. Good, deep soil allows a conventional tank and field. Tight lots, high water tables and clay often call for an engineered option such as a mound, pressure dosed field or aerobic unit. A designer explains which systems are allowed on your property.
The permit process for a new system
Installing or replacing a septic system almost always needs approval from the Oklahoma County health department or the state agency that oversees septic systems. The usual steps are a soil evaluation, a stamped design, plan review and one or more inspections during construction. Starting without a permit can mean digging it all up again.
What affects installation cost
The biggest factors are system type, soil conditions, lot access, tank size and local permit requirements. Conventional systems in good soil generally cost the least. Mounds, aerobic units and other engineered systems cost more to build and maintain. Removing an old system and restoring landscaping add to replacement projects.
Caring for a new septic system
Keep a copy of the design and as-built drawing, schedule your first pumping as recommended, and keep vehicles and structures off the tank and field. Plant only grass over the dispersal area and direct roof and yard runoff away from it. Systems with pumps or treatment units need regular service to stay under warranty.
Questions for a septic installer
Ask who will do the soil test and design, whether they pull the permit, and which system types they recommend for your lot and why. Ask how long the project will take, what warranty they give, and whether the quote includes restoring the yard. Ask for references from recent jobs near Edmond.
How long a new system takes near Edmond
Soil testing, design and permit review usually take longer than construction. In Oklahoma County, wet seasons and frozen ground can delay soil evaluations, and review times vary through the year. Once the permit is in hand, most installations take a few days to a couple of weeks.
Mistakes to avoid on a Edmond installation
The most expensive mistakes happen before the digging starts. Skipping the soil evaluation, choosing a system on price alone, or placing the drain field where future driveways, pools or additions will go all lead to trouble later. Undersizing the tank for the number of bedrooms is another common one. Ask your Edmond installer to walk you through the site plan and explain why each part sits where it does.
Building a system near Edmond
Homes around Edmond that are not on public sewer need a septic system sized to the house and the soil. The site evaluation shapes everything that follows, from the tank size to where the field goes. Plan the layout before other outdoor projects so nothing ends up on top of the field.
What Edmond's soil means for a new system
The USDA soil survey rates most mapped soils near Edmond as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Edmond averages about 34 inches of precipitation a year, which your designer will factor into where the system goes.
Local conditions in Edmond that affect septic installation
Among the mapped soils within about two miles of central Edmond, the USDA soil survey rates 80% as very limited for septic absorption fields, 20% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Edmond averages about 34 inches of precipitation a year, and May is usually the wettest month. January is the coldest month at about 37°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Edmond means for septic installation
By drainage class, the USDA soil survey maps the land around Edmond as 75% well drained, 8% excessively drained, 7% somewhat excessively drained, 6% moderately well drained, 4% somewhat poorly drained. Most of the soil here drains reasonably well, so a conventional trench field is often possible where the lot allows, but the soil test still decides.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Edmond
These are the septic companies in our directory closest to Edmond, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Si Precast Concrete, Oklahoma City, OK, 8.8 mi
- Liquid Mud Co, Edmond, OK, 9.5 mi
- Dan Triplett Contracting Inc, Guthrie, OK, 9.8 mi
- Bross Enterprises Inc, Guthrie, OK, 12.4 mi
- Bean Construction Co, Choctaw, OK, 13.7 mi
- Johnson Construction, Choctaw, OK, 14.2 mi
Septic Installation in nearby towns
We also cover septic installation in these towns near Edmond:
- Jones, 10.2 mi
- The Village, 10.8 mi
- Nichols Hills, 11.4 mi
- Forest Park, 11.5 mi
- Spencer, 11.5 mi
- Luther, 12.5 mi
About Edmond, OK
Edmond is in Oklahoma County, Oklahoma. About 98,103 people live there, across 84.4 square miles of land (about 1,162 per square mile).
Septic Installation questions in Edmond
- How long does septic installation take?
- Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
- What is a mound system?
- A mound system raises the drain field above the natural soil using sand and fill. It is used where the soil is too shallow, too wet or too slow draining for a conventional field.
- Do I need a soil test for a new septic system?
- Yes, in nearly all cases. The soil evaluation decides what type of system and how large a field your lot can support.
- Who approves septic installations in Edmond?
- Septic permits are usually handled at the county or state level. Contact the Oklahoma County health department to confirm the requirements for your property.