New Septic Systems for Parkside Properties
Replacing a failed system or installing one for a new build in Parkside involves more than digging a hole for a tank. Soil testing, system design, permits and inspections all shape the final result.
A local installer can tell you which system types are likely to work on your lot and what the process looks like.
The installation process step by step
It starts with testing the soil to see how well it absorbs water. A designer or engineer then sizes the tank and dispersal area for the number of bedrooms. After the permit is approved, the crew excavates, sets the tank, installs the pipes and field, and schedules an inspection before backfilling.
Choosing the right system
The best system is the one your soil and lot can support. Good, deep soil often allows a conventional system. Clay, high groundwater or shallow bedrock may call for a mound, pressure distribution or an aerobic unit. Each has different costs and maintenance needs, so ask your installer to explain them.
Permits and approvals
New and replacement systems almost always need a permit. Expect a soil evaluation, a design that meets local code, plan review and at least one inspection during installation. the Delaware County health department or your state agency sets the requirements, and many installers handle the application for you.
Understanding installation quotes
A complete quote should cover design, permits, excavation, the tank, the dispersal system, inspections and site restoration. Ask what is excluded, such as tree removal, electrical work for pumps or driveway repair. Compare quotes for the same system type.
Caring for a new septic system
Keep a copy of the design and as-built drawing, schedule your first pumping as recommended, and keep vehicles and structures off the tank and field. Plant only grass over the dispersal area and direct roof and yard runoff away from it. Systems with pumps or treatment units need regular service to stay under warranty.
Choosing an installation company
Look for experience with the soils and systems common around Parkside and Brookhaven, Upland, Chester, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.
How long the whole project takes
The digging and installation often take days, but the full project in Parkside can take several weeks once testing, design and permit review are included. Ask your installer for a realistic timeline for your county and what could change it, such as wet weather or a busy review office.
Common installation mistakes
The costliest mistakes are skipping the soil test, undersizing the system to save money, and building the field where water collects or where you later want a driveway or garage. Hiring an installer who does not handle permits can also delay the job or force rework after a failed inspection.
Planning a new system near Parkside
A new septic system near Parkside starts with a site visit and a soil evaluation. Those results decide the system type, the tank size and where the drain field can go. Delaware County reviews the design before work begins and inspects it before it is covered. Planning early keeps the project from holding up a closing or a build.
What Parkside's soil means for a new system
The USDA soil survey rates most mapped soils near Parkside as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. With about 48 inches of precipitation a year, designers here account for high water tables and runoff when sizing and placing a system. About 2 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.
Local conditions in Parkside that affect septic installation
Among the mapped soils within about two miles of central Parkside, the USDA soil survey rates 96% as very limited for septic absorption fields, 4% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Parkside averages about 48 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 2 months a year, with January averaging 29°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Parkside means for septic installation
By drainage class, the USDA soil survey maps the land around Parkside as 68% well drained, 19% moderately well drained, 8% poorly drained, 2% somewhat excessively drained, 2% somewhat poorly drained. Most of the soil here drains reasonably well, so a conventional trench field is often possible where the lot allows, but the soil test still decides.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Parkside
These are the septic companies in our directory closest to Parkside, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Joseph Walls Septic Service, Upper Chichester, PA, 5.0 mi
- B Martin Wastewater Service, Garnet Valley, PA, 5.9 mi
- Hickman Sanitation Service, West Chester, PA, 12.4 mi
- Eldredge Septic Service, West Chester, PA, 13.7 mi
- J L Natoli Excavating, West Chester, PA, 16.1 mi
- Billy's Septic Service, Monroeville, NJ, 17.5 mi
Septic Installation in nearby towns
We also cover septic installation in these towns near Parkside:
- Brookhaven, 0.7 mi
- Upland, 0.8 mi
- Chester, 1.5 mi
- Rose Valley, 1.9 mi
- Eddystone, 2.3 mi
- Swarthmore, 2.9 mi
About Parkside, PA
Parkside is in Delaware County, Pennsylvania. About 2,303 people live there, across 0.2 square miles of land (about 11,180 per square mile).
Septic Installation questions in Parkside
- How long does septic installation take?
- Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
- How big does my septic tank need to be?
- Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
- Can a replacement system go in the same place?
- Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
- Is SepticTank.com the installer?
- No. SepticTank.com connects you with an independent local septic company that serves Parkside. That company designs, installs and prices the system.