Skip to content

Septic Tank Risers for Reading Homes

Easy access makes septic care simpler. Risers and lids let you and your septic company check the tank without digging up the yard, and they make it far easier to find the tank later.

Companies that work across Berks County can add risers to most existing tanks.

What a septic riser is

A riser is a short pipe or collar, usually plastic or concrete, that attaches to the tank opening and extends it to ground level. A lid on top, typically secured with screws or a lock, keeps it closed. Most tanks have at least two openings, and many benefit from a riser on each, plus one on the effluent filter.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

What to expect on installation day

Most riser installations take a few hours. The tank is often pumped at the same time so the crew can inspect it while the openings are exposed. Expect some digging around the lids, which is backfilled when the job is done.

Riser safety

Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.

Is a riser worth it

For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.

What to ask about riser installation

Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.

Choosing risers and lids for a Reading tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

Living with risers

With risers in place, future pumping and inspections are faster and cleaner. Keep the lids visible, do not cover them with mulch or landscaping, and check every so often that the screws are tight and the lids are not cracked.

Is your tank a good candidate

Most tanks can take risers, but the value depends on how deep the lids are and how often the tank is opened. Ask your Reading septic company how deep your lids sit, how much digging costs on each visit, and whether an effluent filter is installed. Those answers usually make the decision easy.

Risers on Berks County septic tanks

Many older tanks in Berks County were buried deep with no easy access, so riser installation is a common job for companies serving Reading and West Reading, Mount Penn, Wyomissing. Adding them during the next pumping visit avoids digging twice.

Risers and lids for Reading weather

Where soils are rated very limited, as most mapped soils near Reading are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. With about 49 inches of precipitation a year, a well-sealed riser matters. Poorly sealed joints can let groundwater into the tank. With about 2 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Reading that affect septic riser and lid installation

Among the mapped soils within about two miles of central Reading, the USDA soil survey rates 83% as very limited for septic absorption fields, 13% as somewhat limited and 4% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Reading averages about 49 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 2 months a year, with January averaging 27°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Reading means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Reading as 81% well drained, 10% poorly drained, 8% moderately well drained, 1% somewhat poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Reading

These are the septic companies in our directory closest to Reading, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Reading:

About Reading, PA

Reading is in Berks County, Pennsylvania. About 94,903 people live there, across 9.8 square miles of land (about 9,642 per square mile).

Septic Riser and Lid Installation questions in Reading

Do septic risers let water into the tank?
Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
Will risers make my yard look worse?
Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Can I mow over a septic riser?
Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
Do I need a permit to add risers?
Usually not, but some areas have rules. Check with the Berks County health department or ask your septic company.

Get septic help in Reading, PA

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.

Septic Riser and Lid Installation near Reading