Septic Tank Risers for Irving Homes
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Irving will explain the options and install risers on your tank.
What risers do for a septic tank
Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.
Why homeowners install risers
Easier access encourages regular maintenance, which is the best protection for a septic system. Risers also mark the tank location clearly, so it is not lost or damaged during future projects on your Irving property.
Installing risers step by step
The crew finds the tank and uncovers each opening, cleans the top of the tank, then attaches the riser with sealant or fasteners so groundwater cannot leak in. The riser is cut to the right height, a lid is screwed on and the soil is backfilled. It is often done during a pumping visit.
Keeping riser lids safe
An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.
What affects riser cost
Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.
Choosing a riser installer
Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Irving and Euless, Farmers Branch, Coppell helps them match the right parts to your tank.
Picking lids for Irving risers
Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.
After risers are installed
Once risers are in, pumping and inspection visits in Irving are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.
Is your tank a good candidate
Most tanks can take risers, but the value depends on how deep the lids are and how often the tank is opened. Ask your Irving septic company how deep your lids sit, how much digging costs on each visit, and whether an effluent filter is installed. Those answers usually make the decision easy.
Why Irving homeowners add risers
Risers bring the tank lids up to ground level on Irving properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.
Risers and lids for Irving weather
Where soils are rated very limited, as most mapped soils near Irving are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Irving averages about 36 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out.
Local conditions in Irving that affect septic riser and lid installation
Among the mapped soils within about two miles of central Irving, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is moderately well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Irving averages about 36 inches of precipitation a year, and May is usually the wettest month. January is the coldest month at about 44°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Irving means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Irving as 54% moderately well drained, 46% well drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Irving
These are the septic companies in our directory closest to Irving, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Rawhide Services, Dallas, TX, 10.5 mi
- A & M Septic, Flower Mound, TX, 14.4 mi
- United Septic & Maintenance, Dallas, TX, 15.3 mi
- A1 Septic Tank Service, Cedar Hill, TX, 18.9 mi
- Cruse Pumping & Backhoe Service, Roanoke, TX, 20.0 mi
- Fort Worth Tank Works LLC, Fort Worth, TX, 20.6 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Irving:
- Euless, 6.3 mi
- Farmers Branch, 7.2 mi
- Coppell, 7.4 mi
- Grapevine, 8.1 mi
- Cockrell Hill, 9.5 mi
- Bedford, 9.6 mi
About Irving, TX
Irving is in Dallas County, Texas. About 254,373 people live there, across 67.0 square miles of land (about 3,798 per square mile).
Septic Riser and Lid Installation questions in Irving
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Will risers make my yard look worse?
- Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Irving. That company does the work and sets its own prices.