Can I install a septic system myself?

Most areas require licensed designers or installers and inspections. Check with the Salt Lake County health department before planning any work yourself.

What is a mound system?

A mound system raises the drain field above the natural soil using sand and fill. It is used where the soil is too shallow, too wet or too slow draining for a conventional field.

Do I need a soil test for a new septic system?

Yes, in nearly all cases. The soil evaluation decides what type of system and how large a field your lot can support.

Is SepticTank.com the installer?

No. SepticTank.com connects you with an independent local septic company that serves Midvale. That company designs, installs and prices the system.

Septic System Installation in Midvale, UT

Whether you are building a new home in Midvale or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.

Request a call and a local septic company that installs systems in Midvale and Murray, White City metro, Sandy will explain the process from site evaluation to final inspection.

From soil test to finished system

A septic installation starts with a soil and site evaluation, which decides what kind of system the lot can support. A designer then sizes the system for the number of bedrooms, the plan goes to the Salt Lake County health department for a permit, and the installer digs, sets the tank and builds the drain field before a final inspection.

Types of septic systems

Conventional systems use a tank and a gravity drain field and suit lots with good soil. Where soil is poor, shallow or wet, options include pressure distribution, mound systems, chamber systems, sand filters and aerobic treatment units. Your soil test and local rules decide which types are allowed on your lot.

Working with local regulators

Septic rules exist to protect groundwater and neighbors' wells. Before installation, plans are reviewed for setbacks from wells, property lines and water. Inspectors typically check the work before it is covered. Ask your installer what approvals are needed in Midvale and how long review usually takes.

Why installation prices vary

Installation price depends on the system type the soil allows, the size of the house, the distance from the house to the field, how easy the site is to reach with equipment, and design and permit fees. Engineered systems such as mounds and aerobic units cost more to build and maintain.

After installation

Ask your installer for records, maintenance instructions and warranty details. Mark the tank and field location so they are not damaged by future projects. Some systems require a service contract, so confirm what applies to yours.

Choosing an installation company

Look for experience with the soils and systems common around Midvale and Murray, White City metro, Sandy, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.

How long a new system takes near Midvale

Soil testing, design and permit review usually take longer than construction. In Salt Lake County, wet seasons and frozen ground can delay soil evaluations, and review times vary through the year. Once the permit is in hand, most installations take a few days to a couple of weeks.

What to avoid on a new system near Midvale

Avoid choosing an installer on price alone, starting before the permit is approved, or placing the field in a low spot that stays wet. Think about future plans for the yard, since a pool, addition or outbuilding cannot go over the field later.

Building a system near Midvale

Homes around Midvale that are not on public sewer need a septic system sized to the house and the soil. The site evaluation shapes everything that follows, from the tank size to where the field goes. Plan the layout before other outdoor projects so nothing ends up on top of the field.

What Midvale's soil means for a new system

The USDA soil survey rates most mapped soils near Midvale as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Midvale averages about 21 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.

Local conditions in Midvale that affect septic installation

Among the mapped soils within about two miles of central Midvale, the USDA soil survey rates 90% as very limited for septic absorption fields, 10% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Midvale averages about 21 inches of precipitation a year, and December is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Midvale means for septic installation

By drainage class, the USDA soil survey maps the land around Midvale as 51% well drained, 23% somewhat poorly drained, 10% somewhat excessively drained, 10% poorly drained, 6% excessively drained. With 33% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Midvale

These are the septic companies in our directory closest to Midvale, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

A1 Waste Pumping, Highland, UT, 14.8 mi
AAA Septic Tank Pumping, Ogden, UT, 43.5 mi

Septic Installation in nearby towns

We also cover septic installation in these towns near Midvale:

Murray, 2.5 mi
White City metro, 3.5 mi
Sandy, 3.7 mi
Cottonwood Heights, 4.1 mi
Taylorsville, 4.2 mi
Holladay, 4.8 mi

About Midvale, UT

Midvale is in Salt Lake County, Utah. About 35,561 people live there, across 5.9 square miles of land (about 6,032 per square mile).

Septic Installation questions in Midvale

Can I install a septic system myself?: Most areas require licensed designers or installers and inspections. Check with the Salt Lake County health department before planning any work yourself.
What is a mound system?: A mound system raises the drain field above the natural soil using sand and fill. It is used where the soil is too shallow, too wet or too slow draining for a conventional field.
Do I need a soil test for a new septic system?: Yes, in nearly all cases. The soil evaluation decides what type of system and how large a field your lot can support.
Is SepticTank.com the installer?: No. SepticTank.com connects you with an independent local septic company that serves Midvale. That company designs, installs and prices the system.