Septic Tank Risers for Murray Homes
Many septic tanks in Murray sit a foot or more underground, which means digging every time the tank needs pumping or inspection. A riser brings the access opening up to ground level so the tank can be reached in minutes.
A local septic company that serves Murray and Midvale, Taylorsville, Holladay can install risers and secure lids, often during a regular pumping visit.
Septic risers explained
Septic tanks are often buried a foot or more below the lawn, so reaching the lids means digging every time. A riser is a short section of pipe or collar that sits on the tank opening and brings it up to the surface, topped with a secure lid that you can open in minutes.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
What to expect on installation day
Most riser installations take a few hours. The tank is often pumped at the same time so the crew can inspect it while the openings are exposed. Expect some digging around the lids, which is backfilled when the job is done.
Keeping riser lids safe
An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.
Is a riser worth it
For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.
What to ask about riser installation
Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.
Materials and options
Most homeowners in Murray choose plastic risers with a green or tan lid that blends into the lawn. Concrete risers suit some tanks and settings better. The key choices are the diameter to match your tank opening, the height needed to reach grade, and whether you want an insulated or traffic-rated lid.
Living with risers
With risers in place, future pumping and inspections are faster and cleaner. Keep the lids visible, do not cover them with mulch or landscaping, and check every so often that the screws are tight and the lids are not cracked.
Signs your tank needs risers
If lids are buried, if the crew has to probe the yard to find the tank, or if past visits left holes in the lawn, risers will help. They also make sense if your system has a filter that should be checked often.
Making tanks easier to reach near Murray
If your service company has to dig to reach the tank every time, risers are worth asking about. Septic companies around Murray install them on most tank types, and the savings on future visits often cover the cost over time.
Risers and lids for Murray weather
Where soils are rated very limited, as most mapped soils near Murray are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Murray averages about 21 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Murray that affect septic riser and lid installation
Among the mapped soils within about two miles of central Murray, the USDA soil survey rates 88% as very limited for septic absorption fields, 12% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Murray averages about 21 inches of precipitation a year, and December is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Murray means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Murray as 47% well drained, 23% somewhat poorly drained, 15% poorly drained, 7% excessively drained, 4% somewhat excessively drained, 4% moderately well drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Murray
These are the septic companies in our directory closest to Murray, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- A1 Waste Pumping, Highland, UT, 17.2 mi
- AAA Septic Tank Pumping, Ogden, UT, 41.1 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Murray:
- Midvale, 2.5 mi
- Taylorsville, 3.3 mi
- Holladay, 3.4 mi
- South Salt Lake, 3.9 mi
- Millcreek, 4 mi
- Cottonwood Heights, 4.6 mi
About Murray, UT
Murray is in Salt Lake County, Utah. About 49,553 people live there, across 12.3 square miles of land (about 4,030 per square mile).
Septic Riser and Lid Installation questions in Murray
- Do septic risers let water into the tank?
- Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
- Will risers make my yard look worse?
- Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Murray. That company does the work and sets its own prices.