How long does a septic inspection take?

Most take one to three hours. Time depends on how easy the system is to find, whether the tank is pumped during the visit and how much testing is done on the drain field.

Is a home inspection enough for a septic system?

Usually not. General home inspectors often do only a quick look at the septic system. A septic company opens the tank and evaluates the drain field, which gives a much more complete picture.

Does Washington require a septic inspection when a home is sold?

Rules differ by county and state. Some areas require an inspection or certification when a home changes hands and others do not. Check with the Washington County health department to confirm what applies.

How often should I inspect my septic system?

A professional inspection every few years is a good habit, often at the same time as pumping. Systems with pumps, aerobic units or known problems may need more frequent checks.

Septic Inspection in Washington, UT

If a home in Washington uses a septic system, the condition of that system can change what the house is worth. An inspection looks at the tank, the pipes and the drain field so there are no surprises after closing.

Local septic companies that serve Washington can inspect for a sale, a refinance or simply because you want to know how your system is holding up.

What the inspector checks

Expect the inspector to look at four main things. First is the tank's structure and water level, then the inlet and outlet baffles. Next come any pumps, floats and alarms, and finally how well the drain field is absorbing water. On older Washington homes they also look for signs that the system was changed or repaired without records. The goal is a clear picture of whether the system works today and what it may need soon.

Quick checks versus complete inspections

Some inspections only confirm that drains run and nothing is obviously wrong. A complete inspection opens and measures the tank, examines the baffles and filter, checks pumps and alarms, and evaluates the drain field. When money is on the line, such as a home purchase, the complete version is usually worth it.

Inspections for buyers and sellers

Buyers use an inspection to learn what they are taking on. Sellers use one to fix problems before listing or to show buyers the system is sound. In either case, schedule early in the process so there is time to pump, make repairs or negotiate. Waiting until the last week before closing leaves little room if the inspector finds a problem.

Why the written report matters

The report is what you, your lender and the other party in a sale will rely on. It should describe the system in plain terms, note its condition, and separate urgent problems from routine maintenance. A report with measurements and photos is far more useful than a single line saying the system passed.

Before the inspection day

Make the inspector's job easier by locating the tank lids or marking where you think they are, and moving vehicles away from the area. Have a list of questions ready. If you are a buyer, ask the seller for any septic records the Washington County health office may have on file.

What to ask before you book

Useful questions include: What will you check, and what is outside your inspection? Is the tank pumped during the visit? Do you include the drain field? How will you document what you find? Will your report meet what my lender or buyer needs? Clear answers make it easy to compare companies.

Septic inspections in Washington County

Inspection requirements differ across Washington County and neighboring areas, and some local health departments keep records of past permits and inspections. Ask the Washington County health department whether there is a file for the property. An inspector who knows local rules can tell you what a buyer or lender will expect.

What inspectors look at closely around Washington

Soil conditions vary around Washington, so a good inspection looks at how this particular yard drains rather than assuming. Washington gets about 10 inches of precipitation a year, so wet spots over the drain field stand out and deserve a closer look.

Local conditions in Washington that affect septic inspection

Among the mapped soils within about two miles of central Washington, the USDA soil survey rates 49% as very limited for septic absorption fields, 30% as somewhat limited and 20% as not limited. The most common drainage class is well drained. Conditions vary from lot to lot here, so a site evaluation is the only way to know how well a particular yard will handle a drain field.

Washington averages about 10 inches of precipitation a year, and February is usually the wettest month. December is the coldest month at about 40°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Washington means for septic inspection

By drainage class, the USDA soil survey maps the land around Washington as 72% well drained, 15% somewhat excessively drained, 8% poorly drained, 5% moderately well drained. A good inspection here checks the drain field as well as the tank.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Washington

These are the septic companies in our directory closest to Washington, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Royal Sanitary Service, Mesquite, NV, 40.4 mi
Don Cox Construction, Kanab, UT, 53.5 mi

Septic Inspection in nearby towns

We also cover septic inspection in these towns near Washington:

St. George, 6 mi
Hurricane, 7.3 mi
Santa Clara, 9.3 mi
Ivins, 11.1 mi
Toquerville, 14.3 mi
La Verkin, 14.9 mi

About Washington, UT

Washington is in Washington County, Utah. About 33,877 people live there, across 36.1 square miles of land (about 938 per square mile).

Septic Inspection questions in Washington

How long does a septic inspection take?: Most take one to three hours. Time depends on how easy the system is to find, whether the tank is pumped during the visit and how much testing is done on the drain field.
Is a home inspection enough for a septic system?: Usually not. General home inspectors often do only a quick look at the septic system. A septic company opens the tank and evaluates the drain field, which gives a much more complete picture.
Does Washington require a septic inspection when a home is sold?: Rules differ by county and state. Some areas require an inspection or certification when a home changes hands and others do not. Check with the Washington County health department to confirm what applies.
How often should I inspect my septic system?: A professional inspection every few years is a good habit, often at the same time as pumping. Systems with pumps, aerobic units or known problems may need more frequent checks.