Skip to content

Septic Tank Risers for Pullman Homes

Many septic tanks in Pullman sit a foot or more underground, which means digging every time the tank needs pumping or inspection. A riser brings the access opening up to ground level so the tank can be reached in minutes.

A local septic company that serves Pullman and Moscow, Palouse, Colfax can install risers and secure lids, often during a regular pumping visit.

Septic risers explained

Septic tanks are often buried a foot or more below the lawn, so reaching the lids means digging every time. A riser is a short section of pipe or collar that sits on the tank opening and brings it up to the surface, topped with a secure lid that you can open in minutes.

Benefits of adding risers

Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.

Installing risers on an existing tank

Nearly any concrete or plastic tank can accept risers. The installer matches the riser to the opening size and material, seals it to keep water out, and secures the lid. Lids should always be fastened so children and pets cannot open them.

Keeping riser lids safe

An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.

What a riser job costs depends on

The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Pullman and Moscow, Palouse, Colfax helps them match the right parts to your tank.

Picking lids for Pullman risers

Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.

After risers are installed

Once risers are in, pumping and inspection visits in Pullman are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.

Is your tank a good candidate

Most tanks can take risers, but the value depends on how deep the lids are and how often the tank is opened. Ask your Pullman septic company how deep your lids sit, how much digging costs on each visit, and whether an effluent filter is installed. Those answers usually make the decision easy.

Risers on Whitman County septic tanks

Many older tanks in Whitman County were buried deep with no easy access, so riser installation is a common job for companies serving Pullman and Moscow, Palouse, Colfax. Adding them during the next pumping visit avoids digging twice.

Risers and lids for Pullman weather

Where soils are rated very limited, as most mapped soils near Pullman are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Pullman averages about 26 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 2 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Pullman that affect septic riser and lid installation

Among the mapped soils within about two miles of central Pullman, the USDA soil survey rates 95% as very limited for septic absorption fields, 5% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Pullman averages about 26 inches of precipitation a year, and December is usually the wettest month. Average temperatures stay below freezing for about 2 months a year, with December averaging 29°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Pullman means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Pullman as 47% well drained, 33% moderately well drained, 20% somewhat poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Pullman

These are the septic companies in our directory closest to Pullman, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Pullman:

About Pullman, WA

Pullman is in Whitman County, Washington. About 32,863 people live there, across 11.1 square miles of land (about 2,955 per square mile).

Septic Riser and Lid Installation questions in Pullman

Do septic risers let water into the tank?
Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
Will risers make my yard look worse?
Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Do risers help in cold climates?
Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Is SepticTank.com the company that installs risers?
No. SepticTank.com connects you with an independent local septic company that serves Pullman. That company does the work and sets its own prices.

Get septic help in Pullman, WA

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.