Septic Riser and Lid Installation in Howard, WI
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Howard will explain the options and install risers on your tank.
What risers do for a septic tank
Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
A typical riser installation
Most riser jobs take a few hours. The tank openings are dug out, the riser is sealed to the tank, trimmed to sit at or just above grade, and a locking lid is installed. Doing it the same day as a pumping saves a second dig.
Riser safety
Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.
Is a riser worth it
For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.
What to ask about riser installation
Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.
Picking lids for Howard risers
Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.
Getting the most from your risers
Risers make it easy to check the effluent filter between pumpings. Ask your septic company to show you how to open the lid safely and what to look for. Many Howard homeowners also find it easier to keep a regular pumping schedule once access is simple.
When risers make the most sense
Risers pay off fastest on tanks buried more than a foot deep, on properties that need frequent pumping, and on systems with an effluent filter that should be cleaned regularly. Homes in Howard that are being sold often add risers so the buyer's inspector can see the tank quickly. They are also a common upgrade after a repair, while the tank is already uncovered.
Making tanks easier to reach near Howard
If your service company has to dig to reach the tank every time, risers are worth asking about. Septic companies around Howard install them on most tank types, and the savings on future visits often cover the cost over time.
Risers and lids for Howard weather
Where soils are rated very limited, as most mapped soils near Howard are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Howard averages about 34 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 4 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Howard that affect septic riser and lid installation
Among the mapped soils within about two miles of central Howard, the USDA soil survey rates 88% as very limited for septic absorption fields, 12% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Howard averages about 34 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 4 months a year, with January averaging 18°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Howard means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Howard as 62% well drained, 17% somewhat poorly drained, 8% poorly drained, 6% very poorly drained, 6% excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Howard
These are the septic companies in our directory closest to Howard, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- George Chambers Sewer & Water, Suamico, WI, 2.6 mi
- Schroeder Environmental Cleaning, Green Bay, WI, 4.6 mi
- Murphy Septic Service LLC, De Pere, WI, 7.4 mi
- J L Enterprises, Seymour, WI, 11.2 mi
- Schroeder Septic Systems, De Pere, WI, 12.6 mi
- Arrow Sanitation, New Franken, WI, 13.2 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Howard:
About Howard, WI
Howard is in Brown County, Wisconsin. About 20,775 people live there, across 18.4 square miles of land (about 1,126 per square mile).
Septic Riser and Lid Installation questions in Howard
- Do septic risers let water into the tank?
- Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
- Can risers be installed on any tank?
- Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Do I need a permit to add risers?
- Usually not, but some areas have rules. Check with the Brown County health department or ask your septic company.