Skip to content

New Septic Systems for Somers Properties

A new septic system is a long-term investment. Getting it right means a proper site evaluation, a design that fits your property and a permit approved before any digging starts.

Septic companies that work across Kenosha County can guide you through each step and handle much of the paperwork.

The installation process step by step

It starts with testing the soil to see how well it absorbs water. A designer or engineer then sizes the tank and dispersal area for the number of bedrooms. After the permit is approved, the crew excavates, sets the tank, installs the pipes and field, and schedules an inspection before backfilling.

Types of septic systems

Conventional systems use a tank and a gravity drain field and suit lots with good soil. Where soil is poor, shallow or wet, options include pressure distribution, mound systems, chamber systems, sand filters and aerobic treatment units. Your soil test and local rules decide which types are allowed on your lot.

What the permit process involves

Most permit processes include a site and soil evaluation, a system design, plan approval and final inspection. Fees and timelines vary. Starting the process early, especially for new construction, keeps the project on schedule.

Why installation prices vary

Soil and site conditions drive most of the difference. A flat lot with deep, well-drained soil is simpler than a sloped lot with clay or high groundwater. Access for equipment and the distance from the house also matter.

After installation

Ask your installer for records, maintenance instructions and warranty details. Mark the tank and field location so they are not damaged by future projects. Some systems require a service contract, so confirm what applies to yours.

Choosing an installation company

Look for experience with the soils and systems common around Somers and Sturtevant, Kenosha, Mount Pleasant, clear written quotes and a plan for permits and inspections. A good installer explains tradeoffs between system types rather than pushing one option.

Getting ready for installation day

Clear access for equipment, mark wells, underground utilities and sprinkler lines, and plan where soil and materials will be staged. Your Somers installer will call in utility locates before digging. Expect some disturbance to the yard, which is regraded and seeded or restored as part of the job.

What experienced installers watch for

Good installers in Somers pay attention to setbacks from wells and property lines, the slope of the lot, and where roof and yard water drains. They also plan how equipment will reach the site without compacting the future drain field. They also confirm the design matches the permit before the first shovel goes in. Small details at this stage decide whether the system lasts decades or needs early repair.

Before the digging starts in Somers

Installing a septic system in Somers touches the whole yard, so plan access for the excavator and the tank delivery. Mark wells, water lines and property corners first. Ask the installer how they will restore the lawn afterward. A clear plan now avoids moving a driveway, a shed or a fence later.

What Somers's soil means for a new system

The USDA soil survey rates most mapped soils near Somers as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Somers averages about 38 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.

Local conditions in Somers that affect septic installation

Among the mapped soils within about two miles of central Somers, the USDA soil survey rates 96% as very limited for septic absorption fields, 4% as somewhat limited and 0% as not limited. The most common drainage class is moderately well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Somers averages about 38 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 21°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Somers means for septic installation

By drainage class, the USDA soil survey maps the land around Somers as 43% moderately well drained, 24% somewhat poorly drained, 17% well drained, 8% poorly drained, 8% very poorly drained. With 40% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Somers

These are the septic companies in our directory closest to Somers, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Septic Installation in nearby towns

We also cover septic installation in these towns near Somers:

About Somers, WI

Somers is in Kenosha County, Wisconsin. About 8,140 people live there, across 25.8 square miles of land (about 316 per square mile).

Septic Installation questions in Somers

Can I install a septic system myself?
Most areas require licensed designers or installers and inspections. Check with the Kenosha County health department before planning any work yourself.
How big does my septic tank need to be?
Tank size is usually based on the number of bedrooms and local code. Your designer will size the tank and field for your home.
Can a replacement system go in the same place?
Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
Is SepticTank.com the installer?
No. SepticTank.com connects you with an independent local septic company that serves Somers. That company designs, installs and prices the system.

Get septic help in Somers, WI

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.