Septic Riser and Lid Installation in Kemmerer, WY
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Kemmerer will explain the options and install risers on your tank.
What a septic riser is
A riser is a short pipe or collar, usually plastic or concrete, that attaches to the tank opening and extends it to ground level. A lid on top, typically secured with screws or a lock, keeps it closed. Most tanks have at least two openings, and many benefit from a riser on each, plus one on the effluent filter.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
How riser installation works
The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.
Riser safety
Septic tanks contain gases and deep liquid, so lids must stay secured. Use lids with screws or locks, replace cracked lids promptly and never leave an opening uncovered. Keep vehicles off riser lids unless they are rated for traffic.
What affects riser cost
Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.
Questions to ask about risers
Ask how many openings your tank has, which should get risers, what material they use, and whether lids are secured with screws or locks. Ask if they can install during your next pumping.
Picking lids for Kemmerer risers
Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.
After the risers go in
Make a note of where the lids are for future owners and service crews. Mowing around them is easy if they sit flush, and they make it simple to check the effluent filter or water level. Report any loose or damaged lid to your septic company.
Good times to add risers
The best time to add risers is during a scheduled pumping, when the lids are already dug up. They are also worth adding after buying a home if no one knows where the lids are, or if your service company charges extra to dig.
Making tanks easier to reach near Kemmerer
If your service company has to dig to reach the tank every time, risers are worth asking about. Septic companies around Kemmerer install them on most tank types, and the savings on future visits often cover the cost over time.
Risers and lids for Kemmerer weather
Where soils are rated very limited, as most mapped soils near Kemmerer are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Kemmerer gets about 18 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging. With about 5 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Kemmerer that affect septic riser and lid installation
Among the mapped soils within about two miles of central Kemmerer, the USDA soil survey rates 77% as very limited for septic absorption fields, 18% as somewhat limited and 5% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Kemmerer averages about 18 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 5 months a year, with January averaging 15°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Kemmerer means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Kemmerer as 83% well drained, 8% somewhat poorly drained, 8% very poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Kemmerer
These are the septic companies in our directory closest to Kemmerer, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Rocket Sanitation, Evanston, WY, 37.7 mi
- Triple T Septic Cleaning, Montpelier, ID, 58.0 mi
About Kemmerer, WY
Kemmerer is in Lincoln County, Wyoming. About 2,393 people live there, across 7.8 square miles of land (about 307 per square mile).
Septic Riser and Lid Installation questions in Kemmerer
- Do septic risers let water into the tank?
- Not when installed correctly. Joints are sealed to keep groundwater and soil out. Poorly sealed risers can leak, which is why installation quality matters.
- Can risers be installed on any tank?
- Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
- Can I mow over a septic riser?
- Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Kemmerer. That company does the work and sets its own prices.