Septic Tank Risers for Lander Homes
Easy access makes septic care simpler. Risers and lids let you and your septic company check the tank without digging up the yard, and they make it far easier to find the tank later.
Companies that work across Fremont County can add risers to most existing tanks.
What risers do for a septic tank
Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.
Benefits of adding risers
Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.
What to expect on installation day
Most riser installations take a few hours. The tank is often pumped at the same time so the crew can inspect it while the openings are exposed. Expect some digging around the lids, which is backfilled when the job is done.
Keeping riser lids safe
An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.
What affects riser cost
Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.
What to ask about riser installation
Ask how many openings your tank has and which ones should get risers, what material they install, how the risers are sealed to the tank, and how the lids are secured. Ask whether combining the job with pumping lowers the total cost.
Plastic or concrete risers
Plastic risers are lightweight, easy to trim to height and do not corrode, so they suit most existing tanks. Concrete risers are heavy and durable but harder to install and can let in water if joints are not sealed well. Your septic company can recommend the right option for your tank.
After the risers go in
Make a note of where the lids are for future owners and service crews. Mowing around them is easy if they sit flush, and they make it simple to check the effluent filter or water level. Report any loose or damaged lid to your septic company.
Good times to add risers
The best time to add risers is during a scheduled pumping, when the lids are already dug up. They are also worth adding after buying a home if no one knows where the lids are, or if your service company charges extra to dig.
Choosing riser lids for a Lander yard
Riser lids for Lander homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.
Risers and lids for Lander weather
Where soils are rated very limited, as most mapped soils near Lander are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Lander gets about 14 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Lander that affect septic riser and lid installation
Among the mapped soils within about two miles of central Lander, the USDA soil survey rates 78% as very limited for septic absorption fields, 22% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Lander averages about 14 inches of precipitation a year, and May is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 23°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Lander means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Lander as 79% well drained, 10% somewhat poorly drained, 8% moderately well drained, 4% very poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Lander
We do not have a septic company on file within 60 miles of Lander yet. Send a request and we will find the closest companies for you.
About Lander, WY
Lander is in Fremont County, Wyoming. About 7,615 people live there, across 9.4 square miles of land (about 812 per square mile).
Septic Riser and Lid Installation questions in Lander
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Will risers make my yard look worse?
- Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
- Do risers help in cold climates?
- Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Lander. That company does the work and sets its own prices.