Skip to content

Septic Tank Risers for Kingman Homes

Easy access makes septic care simpler. Risers and lids let you and your septic company check the tank without digging up the yard, and they make it far easier to find the tank later.

Companies that work across Mohave County can add risers to most existing tanks.

Septic risers explained

Septic tanks are often buried a foot or more below the lawn, so reaching the lids means digging every time. A riser is a short section of pipe or collar that sits on the tank opening and brings it up to the surface, topped with a secure lid that you can open in minutes.

Why homeowners install risers

Easier access encourages regular maintenance, which is the best protection for a septic system. Risers also mark the tank location clearly, so it is not lost or damaged during future projects on your Kingman property.

Installing risers on an existing tank

Nearly any concrete or plastic tank can accept risers. The installer matches the riser to the opening size and material, seals it to keep water out, and secures the lid. Lids should always be fastened so children and pets cannot open them.

Keeping riser lids safe

An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.

What affects riser cost

Price depends on the number of openings, how deep the tank is, the riser material and whether the job is combined with pumping. Deeper tanks need taller risers and more digging. Insulated or traffic-rated lids cost more.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Kingman and nearby communities helps them match the right parts to your tank.

Plastic or concrete risers

Plastic risers are lightweight, easy to trim to height and do not corrode, so they suit most existing tanks. Concrete risers are heavy and durable but harder to install and can let in water if joints are not sealed well. Your septic company can recommend the right option for your tank.

After risers are installed

Once risers are in, pumping and inspection visits in Kingman are quicker because the crew can open the tank without digging. Keep the lids visible and clear of mulch or soil, and check them now and then for cracks or loose screws. Note the location on a sketch of your property so future owners and contractors can find the tank easily.

Good times to add risers

The best time to add risers is during a scheduled pumping, when the lids are already dug up. They are also worth adding after buying a home if no one knows where the lids are, or if your service company charges extra to dig.

Making tanks easier to reach near Kingman

If your service company has to dig to reach the tank every time, risers are worth asking about. Septic companies around Kingman install them on most tank types, and the savings on future visits often cover the cost over time.

Risers and lids for Kingman weather

Whatever the soil on your lot, easy access through a riser makes routine pumping and filter checks faster. Kingman gets about 10 inches of precipitation a year, so risers here are mainly about access and saving the cost of digging.

Local conditions in Kingman that affect septic riser and lid installation

Among the mapped soils within about two miles of central Kingman, the USDA soil survey rates 56% as very limited for septic absorption fields, 14% as somewhat limited and 30% as not limited. The most common drainage class is well drained. Conditions vary from lot to lot here, so a site evaluation is the only way to know how well a particular yard will handle a drain field.

Kingman averages about 10 inches of precipitation a year, and August is usually the wettest month. December is the coldest month at about 43°F on average, so freezing is rarely the main concern here. Heavy rain and saturated ground are the bigger factors for drain fields.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Kingman means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Kingman as 82% well drained, 18% somewhat excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Kingman

These are the septic companies in our directory closest to Kingman, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

About Kingman, AZ

Kingman is in Mohave County, Arizona. About 35,334 people live there, across 37.5 square miles of land (about 941 per square mile).

Septic Riser and Lid Installation questions in Kingman

How long does riser installation take?
Usually a few hours, often done during a pumping visit.
Will risers make my yard look worse?
Lids sit at or just above ground level and are usually green or tan. Many homeowners find them less noticeable than the patches left by repeated digging.
Can I mow over a septic riser?
Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
Do I need a permit to add risers?
Usually not, but some areas have rules. Check with the Mohave County health department or ask your septic company.

Get septic help in Kingman, AZ

By submitting this request you agree that SepticTank.com and the local septic company it matches you with may contact you by phone, text or email about your request. Message frequency varies. Message and data rates may apply. Reply STOP to opt out, HELP for help.