How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Can risers be installed on any tank?

Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.

Can I mow over a septic riser?

Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.

Is SepticTank.com the company that installs risers?

No. SepticTank.com connects you with an independent local septic company that serves Easton. That company does the work and sets its own prices.

Septic Tank Risers for Easton Homes

Many septic tanks in Easton sit a foot or more underground, which means digging every time the tank needs pumping or inspection. A riser brings the access opening up to ground level so the tank can be reached in minutes.

A local septic company that serves Easton and West Easton, Wilson, Phillipsburg can install risers and secure lids, often during a regular pumping visit.

What risers do for a septic tank

Risers extend the tank openings to ground level. Instead of searching for and digging up buried lids at every service visit, the crew simply unscrews a lid at the surface. Most risers are plastic, though concrete versions are also used, and each opening on the tank can have its own riser.

Why homeowners add risers

Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.

How riser installation works

The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.

Keeping riser lids safe

An open septic tank is dangerous because of gases and deep liquid. Riser lids should be screwed down or locked, rated for foot traffic, and replaced right away if they crack. Never leave a lid off unattended, and keep children and pets away while the tank is open.

What a riser job costs depends on

The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.

Questions to ask about risers

Ask how many openings your tank has, which should get risers, what material they use, and whether lids are secured with screws or locks. Ask if they can install during your next pumping.

Choosing risers and lids for a Easton tank

Risers come in plastic and concrete. Plastic risers are light, easy to cut to height and resist corrosion, which makes them the most common choice for existing tanks. Concrete risers are heavy and durable and are sometimes used on concrete tanks or where traffic is a concern. Lids should be secured with screws or a lock, and insulated lids are available for colder areas.

Getting the most from your risers

Risers make it easy to check the effluent filter between pumpings. Ask your septic company to show you how to open the lid safely and what to look for. Many Easton homeowners also find it easier to keep a regular pumping schedule once access is simple.

Signs a Easton tank would benefit from risers

Risers are worth considering if every pumping visit in Easton starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.

Choosing riser lids for a Easton yard

Riser lids for Easton homes come in green or brown plastic and in concrete. Plastic is lighter and easier to open, while concrete is heavier and harder to move. Either way, the lid should lock or screw down. Ask the installer to seal the joint so groundwater cannot leak into the tank.

Risers and lids for Easton weather

Where soils are rated very limited, as most mapped soils near Easton are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. With about 49 inches of precipitation a year, a well-sealed riser matters. Poorly sealed joints can let groundwater into the tank. With about 2 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Easton that affect septic riser and lid installation

Among the mapped soils within about two miles of central Easton, the USDA soil survey rates 85% as very limited for septic absorption fields, 11% as somewhat limited and 5% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Easton averages about 49 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 2 months a year, with January averaging 28°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Easton means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Easton as 75% well drained, 12% moderately well drained, 7% poorly drained, 3% somewhat excessively drained, 3% excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Easton

These are the septic companies in our directory closest to Easton, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Henry Yeska & Son Inc, Nazareth, PA, 6.5 mi
Yeska Henry Inc Sewerage Service, Nazareth, PA, 6.5 mi
All State Septic, Bangor, PA, 9.7 mi
Brad S Nicholas Septic Tank, Kintnersville, PA, 9.7 mi
Allstate Septic, Bangor, PA, 9.7 mi
Hooper B H Trucking & Excavating, Milford, NJ, 11.4 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Easton:

West Easton, 1.1 mi
Wilson, 1.2 mi
Phillipsburg, 2.1 mi
Alpha, 3.7 mi
Tatamy, 4.3 mi
Nazareth, 6.2 mi

About Easton, PA

Easton is in Northampton County, Pennsylvania. About 29,538 people live there, across 4.3 square miles of land (about 6,929 per square mile).

Septic Riser and Lid Installation questions in Easton

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Can risers be installed on any tank?: Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
Can I mow over a septic riser?: Most lids sit at grade so you can mow around them easily. Avoid driving heavy equipment over them unless they are traffic rated.
Is SepticTank.com the company that installs risers?: No. SepticTank.com connects you with an independent local septic company that serves Easton. That company does the work and sets its own prices.