How long does riser installation take?

Usually a few hours, often done during a pumping visit.

Can risers be installed on any tank?

Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.

Do risers help in cold climates?

Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.

Is SepticTank.com the company that installs risers?

No. SepticTank.com connects you with an independent local septic company that serves Kingston. That company does the work and sets its own prices.

Septic Tank Risers for Kingston Homes

If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.

Request a call and a company working in Kingston will explain the options and install risers on your tank.

Why tanks are buried so deep

Older installations often placed lids well below the surface, sometimes to protect them from freezing or damage. That made sense at the time, but it means every pump-out starts with digging. Risers solve that without moving the tank.

Benefits of adding risers

Risers cut the time and cost of every pumping and inspection, since no digging is needed. They make it easy to check the effluent filter, spot problems early and show inspectors the tank during a home sale. They also protect your lawn from repeated digging.

How riser installation works

The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.

Keeping lids secure

A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.

Is a riser worth it

For most homes with buried lids, yes. The savings from not digging on every visit, plus easier inspections, often cover the cost over a few pumpings. Ask your septic company to compare the cost with what you pay for digging now.

Choosing a riser installer

Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Kingston and Edwardsville, Forty Fort, Wilkes-Barre helps them match the right parts to your tank.

Picking lids for Kingston risers

Lids should be secured with screws or a lock and strong enough to walk on. Green lids blend into a lawn, while lids that sit slightly above grade are easier to find and keep surface water out. Ask your installer what works best for your yard.

Living with risers

With risers in place, future pumping and inspections are faster and cleaner. Keep the lids visible, do not cover them with mulch or landscaping, and check every so often that the screws are tight and the lids are not cracked.

Good times to add risers

The best time to add risers is during a scheduled pumping, when the lids are already dug up. They are also worth adding after buying a home if no one knows where the lids are, or if your service company charges extra to dig.

Why Kingston homeowners add risers

Risers bring the tank lids up to ground level on Kingston properties, so nobody has to dig to reach them. That saves time and money on every pumping and inspection. A secure lid also keeps children and pets safe. Most installs take a few hours and leave only a small patch of disturbed lawn.

Risers and lids for Kingston weather

Where soils are rated very limited, as most mapped soils near Kingston are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. With about 46 inches of precipitation a year, a well-sealed riser matters. Poorly sealed joints can let groundwater into the tank. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.

Local conditions in Kingston that affect septic riser and lid installation

Among the mapped soils within about two miles of central Kingston, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Kingston averages about 46 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 23°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Kingston means for septic riser and lid installation

By drainage class, the USDA soil survey maps the land around Kingston as 48% well drained, 24% moderately well drained, 8% somewhat excessively drained, 7% poorly drained, 7% somewhat poorly drained, 4% excessively drained, 3% very poorly drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Kingston

These are the septic companies in our directory closest to Kingston, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

Rural Septic, Hunlock Creek, PA, 11.3 mi
May's Sewer & Drain, Hunlock Creek, PA, 12.9 mi
Chapin Roy W Septic Tank Cleaning, Huntington Mills, PA, 19.5 mi
Elston William Septic Tanks, Jefferson Twp, PA, 23.3 mi
Chapin Design Co, Benton, PA, 24.0 mi
Avalanche Septic Service LLC, Moscow, PA, 26.0 mi

Septic Riser and Lid Installation in nearby towns

We also cover septic riser and lid installation in these towns near Kingston:

Edwardsville, 1.3 mi
Forty Fort, 1.3 mi
Wilkes-Barre, 1.4 mi
Luzerne, 1.6 mi
Larksville, 2.3 mi
Swoyersville, 2.3 mi

About Kingston, PA

Kingston is in Luzerne County, Pennsylvania. About 13,331 people live there, across 2.1 square miles of land (about 6,212 per square mile).

Septic Riser and Lid Installation questions in Kingston

How long does riser installation take?: Usually a few hours, often done during a pumping visit.
Can risers be installed on any tank?: Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
Do risers help in cold climates?: Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
Is SepticTank.com the company that installs risers?: No. SepticTank.com connects you with an independent local septic company that serves Kingston. That company does the work and sets its own prices.