Septic Tank Risers for Murrysville Homes
If your septic company has to dig up the lid every time they visit, a riser can pay for itself. Risers extend the tank openings to the surface and are capped with lids that lock.
Request a call and a company working in Murrysville will explain the options and install risers on your tank.
What a septic riser is
A riser is a short pipe or collar, usually plastic or concrete, that attaches to the tank opening and extends it to ground level. A lid on top, typically secured with screws or a lock, keeps it closed. Most tanks have at least two openings, and many benefit from a riser on each, plus one on the effluent filter.
Why homeowners add risers
Risers save time and money on every pumping and inspection because no digging is needed. They make it easy to check the filter, see problems early and get to the tank fast in an emergency. Many homeowners add them the first time a crew has to dig for buried lids.
How riser installation works
The crew locates and uncovers the tank openings, cleans the surfaces, attaches the risers with adhesive or fasteners, seals the joints and cuts the risers to height. After the lids are installed and secured, the soil is backfilled around them. Installing risers during a pumping visit saves a separate trip.
Keeping lids secure
A secure lid is a safety requirement, not an option. Check lids once in a while for cracks or loose screws. If a lid is damaged, cover the opening and call for a replacement.
What a riser job costs depends on
The price depends on how many openings get risers, how deep the tank is buried, whether plastic or concrete is used, and whether the job is done during a pumping visit. Deeper tanks need taller risers and more digging, which adds labor time.
Choosing a riser installer
Look for a company that seals risers properly to keep groundwater out and uses secure lids. Experience with tanks common around Murrysville and Delmont, Monroeville, Plum helps them match the right parts to your tank.
Getting the right fit
Tank openings vary in size and shape, so your installer will measure before choosing parts. The riser must seal tightly to the tank so groundwater stays out, and the lid must lock so it cannot be opened by children or pets. Ask your Murrysville septic company which options they recommend for your tank and why.
Caring for lids over time
Sun and mowers can wear lids over the years. Replace any lid that cracks or no longer locks, and keep heavy equipment away unless the lid is rated for traffic. A secure lid on a Murrysville property protects people and pets and keeps rain out of the tank.
Signs a Murrysville tank would benefit from risers
Risers are worth considering if every pumping visit in Murrysville starts with digging. The same goes if nobody is sure where the lids are, or if the crew charges extra to uncover a deep tank. They also help when you want to check the effluent filter yourself or are getting ready to sell and expect an inspection. Landscaping that has made the tank harder to reach is another good reason.
Risers on Westmoreland County septic tanks
Many older tanks in Westmoreland County were buried deep with no easy access, so riser installation is a common job for companies serving Murrysville and Delmont, Monroeville, Plum. Adding them during the next pumping visit avoids digging twice.
Risers and lids for Murrysville weather
Where soils are rated very limited, as most mapped soils near Murrysville are, frequent checks of the tank and filter help protect the drain field. Risers make those checks quick. Murrysville averages about 41 inches of precipitation a year, so ask for sealed joints that keep rain and groundwater out. With about 3 months below freezing, an insulated lid can help protect the tank opening in winter.
Local conditions in Murrysville that affect septic riser and lid installation
Among the mapped soils within about two miles of central Murrysville, the USDA soil survey rates 100% as very limited for septic absorption fields, 0% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Murrysville averages about 41 inches of precipitation a year, and June is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with January averaging 26°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Murrysville means for septic riser and lid installation
By drainage class, the USDA soil survey maps the land around Murrysville as 52% well drained, 37% moderately well drained, 5% somewhat poorly drained, 4% poorly drained, 3% somewhat excessively drained. Risers bring the tank lids to the surface, which makes regular pumping and inspection quicker and cleaner.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Murrysville
These are the septic companies in our directory closest to Murrysville, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- Andrasko & Associates, Jeannette, PA, 5.2 mi
- Hapchuk Sanitation Co, Greensburg, PA, 13.2 mi
- A Larry Smith Septic Tank Service, Latrobe, PA, 13.7 mi
- WDS & Amco Johns, Tarentum, PA, 17.0 mi
- Zimmerman Excavating, Clairton, PA, 17.3 mi
- A-Affordable Sanitation, Smithton, PA, 19.5 mi
Septic Riser and Lid Installation in nearby towns
We also cover septic riser and lid installation in these towns near Murrysville:
About Murrysville, PA
Murrysville is in Westmoreland County, Pennsylvania. About 20,745 people live there, across 36.8 square miles of land (about 563 per square mile).
Septic Riser and Lid Installation questions in Murrysville
- How long does riser installation take?
- Usually a few hours, often done during a pumping visit.
- Can risers be installed on any tank?
- Most concrete and plastic tanks can accept risers. Your septic company will check the openings and choose matching parts.
- Do risers help in cold climates?
- Insulated lids can help protect the tank opening. Ask your septic company whether an insulated lid makes sense for your area.
- Is SepticTank.com the company that installs risers?
- No. SepticTank.com connects you with an independent local septic company that serves Murrysville. That company does the work and sets its own prices.