How long does a septic inspection take?

Most take one to three hours. Time depends on how easy the system is to find, whether the tank is pumped during the visit and how much testing is done on the drain field.

Is a home inspection enough for a septic system?

Usually not. General home inspectors often do only a quick look at the septic system. A septic company opens the tank and evaluates the drain field, which gives a much more complete picture.

Does Murray require a septic inspection when a home is sold?

Rules differ by county and state. Some areas require an inspection or certification when a home changes hands and others do not. Check with the Salt Lake County health department to confirm what applies.

How often should I inspect my septic system?

A professional inspection every few years is a good habit, often at the same time as pumping. Systems with pumps, aerobic units or known problems may need more frequent checks.

Septic System Inspections for Murray Homes

A septic inspection tells you whether the system under a Murray property is working, what shape the tank and drain field are in, and what repairs might be coming. It is one of the most useful reports you can have before buying or selling a home that is not on city sewer.

Request a call and a septic company that inspects systems in Murray and Midvale, Taylorsville, Holladay will explain what their inspection includes and when they can get out.

What the inspector checks

Expect the inspector to look at four main things. First is the tank's structure and water level, then the inlet and outlet baffles. Next come any pumps, floats and alarms, and finally how well the drain field is absorbing water. On older Murray homes they also look for signs that the system was changed or repaired without records. The goal is a clear picture of whether the system works today and what it may need soon.

Choosing the right level of inspection

Not every inspection is the same. Some lenders or buyers only need a basic functional check, while others want the tank pumped and inspected empty, plus a look at the distribution box and drain field. If the system is old, has no records, or the home has been vacant, ask for the more complete option. It costs more up front but gives a far clearer answer.

When to get a septic inspection

Get an inspection before buying a home with a septic system, before listing your own, and when you refinance if the lender asks for one. It also makes sense every few years as part of routine care. Other good times are after a major backup, before adding a bedroom or bathroom, or when the home has been empty a long time. Many owners schedule an inspection at the same time as pumping to save a trip.

What you get in the report

A good inspection report lists the tank size and material, the liquid level and the sludge depth. It covers the baffles, lid and any filter, how the drain field looked, and anything that could not be reached. It should say clearly whether the system was working at the time of inspection and list recommended repairs or maintenance. Photos are a plus. Keep the report with your home records.

Before the inspection day

Make the inspector's job easier by locating the tank lids or marking where you think they are, and moving vehicles away from the area. Have a list of questions ready. If you are a buyer, ask the seller for any septic records the Salt Lake County health office may have on file.

What to ask before you book

Useful questions include: What will you check, and what is outside your inspection? Is the tank pumped during the visit? Do you include the drain field? How will you document what you find? Will your report meet what my lender or buyer needs? Clear answers make it easy to compare companies.

Septic inspections for Murray home sales

Buyers and lenders near Murray often ask for a septic inspection before closing. The inspector checks the tank, baffles, pumps and the drain field and writes up what they find. A clean report helps a sale move quickly. If problems turn up, the report gives both sides something concrete to negotiate.

What inspectors look at closely around Murray

Because most mapped soils near Murray are rated very limited for septic absorption, inspectors pay special attention to how the drain field is handling water. Murray averages about 21 inches of precipitation a year. Mention recent heavy rain to your inspector, since it can change what the drain field shows. Frozen ground in the colder months can limit what an inspector can see, so plan inspections for a home sale early when you can.

Local conditions in Murray that affect septic inspection

Among the mapped soils within about two miles of central Murray, the USDA soil survey rates 88% as very limited for septic absorption fields, 12% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.

Murray averages about 21 inches of precipitation a year, and December is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.

Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.

What the soil around Murray means for septic inspection

By drainage class, the USDA soil survey maps the land around Murray as 47% well drained, 23% somewhat poorly drained, 15% poorly drained, 7% excessively drained, 4% somewhat excessively drained, 4% moderately well drained. A good inspection here checks the drain field as well as the tank, since 38% of the soil drains poorly and that is where fields tend to show trouble first.

Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access

Septic companies near Murray

These are the septic companies in our directory closest to Murray, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.

A1 Waste Pumping, Highland, UT, 17.2 mi
AAA Septic Tank Pumping, Ogden, UT, 41.1 mi

Septic Inspection in nearby towns

We also cover septic inspection in these towns near Murray:

Midvale, 2.5 mi
Taylorsville, 3.3 mi
Holladay, 3.4 mi
South Salt Lake, 3.9 mi
Millcreek, 4 mi
Cottonwood Heights, 4.6 mi

About Murray, UT

Murray is in Salt Lake County, Utah. About 49,553 people live there, across 12.3 square miles of land (about 4,030 per square mile).

Septic Inspection questions in Murray

How long does a septic inspection take?: Most take one to three hours. Time depends on how easy the system is to find, whether the tank is pumped during the visit and how much testing is done on the drain field.
Is a home inspection enough for a septic system?: Usually not. General home inspectors often do only a quick look at the septic system. A septic company opens the tank and evaluates the drain field, which gives a much more complete picture.
Does Murray require a septic inspection when a home is sold?: Rules differ by county and state. Some areas require an inspection or certification when a home changes hands and others do not. Check with the Salt Lake County health department to confirm what applies.
How often should I inspect my septic system?: A professional inspection every few years is a good habit, often at the same time as pumping. Systems with pumps, aerobic units or known problems may need more frequent checks.