New Septic Systems for Murray Properties
Whether you are building a new home in Murray or replacing a system that has reached the end of its life, septic installation is a project that starts with the soil. The right system depends on your lot, your soil and the size of your household.
Request a call and a local septic company that installs systems in Murray and Midvale, Taylorsville, Holladay will explain the process from site evaluation to final inspection.
The installation process step by step
It starts with testing the soil to see how well it absorbs water. A designer or engineer then sizes the tank and dispersal area for the number of bedrooms. After the permit is approved, the crew excavates, sets the tank, installs the pipes and field, and schedules an inspection before backfilling.
Choosing the right system
The best system is the one your soil and lot can support. Good, deep soil often allows a conventional system. Clay, high groundwater or shallow bedrock may call for a mound, pressure distribution or an aerobic unit. Each has different costs and maintenance needs, so ask your installer to explain them.
Permits and approvals
New and replacement systems almost always need a permit. Expect a soil evaluation, a design that meets local code, plan review and at least one inspection during installation. the Salt Lake County health department or your state agency sets the requirements, and many installers handle the application for you.
What you are paying for in a new system
A new system quote covers the soil evaluation and design, permits, the tank, pipe and field materials, excavation and backfill, and the final inspection. Ask whether site restoration such as grading and seeding is included, and whether the quote assumes a conventional system or an engineered one.
The first years with a new system
Keep the design drawing and the final inspection report somewhere safe. Pump on the schedule your installer recommends, use water steadily rather than all at once, and keep vehicles and new structures off the tank and field. Let grass establish over the field before heavy use of the yard.
Before you sign
Make sure the contract lists the system type, the scope of work, permit responsibilities, the timeline, cleanup and warranty. Ask how weather or unexpected site conditions will be handled.
How long the whole project takes
The digging and installation often take days, but the full project in Murray can take several weeks once testing, design and permit review are included. Ask your installer for a realistic timeline for your county and what could change it, such as wet weather or a busy review office.
Mistakes to avoid on a Murray installation
The most expensive mistakes happen before the digging starts. Skipping the soil evaluation, choosing a system on price alone, or placing the drain field where future driveways, pools or additions will go all lead to trouble later. Undersizing the tank for the number of bedrooms is another common one. Ask your Murray installer to walk you through the site plan and explain why each part sits where it does.
Planning a new system near Murray
A new septic system near Murray starts with a site visit and a soil evaluation. Those results decide the system type, the tank size and where the drain field can go. Salt Lake County reviews the design before work begins and inspects it before it is covered. Planning early keeps the project from holding up a closing or a build.
What Murray's soil means for a new system
The USDA soil survey rates most mapped soils near Murray as very limited for septic absorption fields. New systems here often need a mound, pressure distribution or another engineered design, which your soil test will confirm. Murray averages about 21 inches of precipitation a year, which your designer will factor into where the system goes. About 3 months below freezing mean pipes and components must sit deep enough or be insulated, and installation is usually easiest outside winter.
Local conditions in Murray that affect septic installation
Among the mapped soils within about two miles of central Murray, the USDA soil survey rates 88% as very limited for septic absorption fields, 12% as somewhat limited and 0% as not limited. The most common drainage class is well drained. Soils like these often call for careful system design, such as a larger drain field, a mound or another engineered system, and a site evaluation before any new installation or replacement.
Murray averages about 21 inches of precipitation a year, and December is usually the wettest month. Average temperatures stay below freezing for about 3 months a year, with December averaging 25°F, so tank lids and shallow lines benefit from a layer of snow or mulch rather than being cleared bare.
Sources: USDA NRCS Soil Survey (SSURGO), Soil Data Access; NASA POWER long-term climatology. Soil ratings describe mapped soil types near the city center and do not replace a site evaluation of your property.
What the soil around Murray means for septic installation
By drainage class, the USDA soil survey maps the land around Murray as 47% well drained, 23% somewhat poorly drained, 15% poorly drained, 7% excessively drained, 4% somewhat excessively drained, 4% moderately well drained. With 38% of the soil poorly drained, a new or replacement field here is often larger or raised, and a soil test comes before any design.
Source: USDA NRCS Soil Survey (SSURGO), Soil Data Access
Septic companies near Murray
These are the septic companies in our directory closest to Murray, with straight-line distance. Call any of them directly, or send one request and we will pass it to the best match.
- A1 Waste Pumping, Highland, UT, 17.2 mi
- AAA Septic Tank Pumping, Ogden, UT, 41.1 mi
Septic Installation in nearby towns
We also cover septic installation in these towns near Murray:
- Midvale, 2.5 mi
- Taylorsville, 3.3 mi
- Holladay, 3.4 mi
- South Salt Lake, 3.9 mi
- Millcreek, 4 mi
- Cottonwood Heights, 4.6 mi
About Murray, UT
Murray is in Salt Lake County, Utah. About 49,553 people live there, across 12.3 square miles of land (about 4,030 per square mile).
Septic Installation questions in Murray
- How long does septic installation take?
- Installation itself often takes a few days to two weeks. Soil testing, design and permit review can add several weeks, so plan ahead.
- What is a mound system?
- A mound system raises the drain field above the natural soil using sand and fill. It is used where the soil is too shallow, too wet or too slow draining for a conventional field.
- Can a replacement system go in the same place?
- Sometimes. It depends on the condition of the soil in the old field and local rules. Many replacements use a new area of the yard.
- Who approves septic installations in Murray?
- Septic permits are usually handled at the county or state level. Contact the Salt Lake County health department to confirm the requirements for your property.